Overview
The Rubicon Express RE7141 is a 2.5 inch standard coil lift kit without shocks, made for 2007 to 2012 Jeep Wrangler JK models. It replaces the front and rear coil springs and adds alignment washers for caster adjustment, bump stops and sway bar end links.
The kit is designed for easy installation and for more ground clearance, extended wheel travel and room for 35 inch tall tires. It works without changes to driveshafts, exhaust or brake lines.
The kit does not include shocks, so the current shocks are kept or a separate set is fitted with the new springs.
Key features
- 2.5 inch standard coil lift
- Front and rear replacement coil springs
- Front alignment washers for caster adjustment
- Bump stops and a rear track bar bracket
- Extended sway bar end links
- Can be upgraded with further suspension parts.
- Rubicon Express Advantage Lifetime Warranty listed
Shocks after a coil lift
This kit leaves the shocks in place, so the existing units are carried into a higher ride height. Shock length and mounting angle change with the springs, and worn units can feel more pronounced once the body sits higher. Before deciding whether to keep them, check the current shocks for leaks, worn eyelets and bent bodies.
Upgraded shocks are a common next step after a coil lift because they are chosen to match the new spring rate and wheel travel. Matching the shock to the lift height matters more than the brand name, since the wrong length can limit droop or bind at full compression. Bump stops should be inspected at the same time, because they set the limit of travel that the shock helps control.
Rear track bar brackets and sway bar end links are often installed alongside new shocks, so the suspension stays aligned with the new geometry. Keep mounting hardware clean and check it for movement after the first few drives.
- Check existing shocks for fluid leaks
- Inspect shock eyelets and bushings
- Match new shock length to the lift height
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7141 |
| UPC | 614901441734 |
| Lift height | 2.5 inch |
| Suspension type | Coil spring kit |
| Kit type | Standard kit |
| Rear lift method | Coil springs |
| Shocks included | No |
| Fitment | Direct fit |
Vehicle fitment
The kit fits 2007 to 2012 Jeep Wrangler JK models.
Confirm your vehicle’s year, model and trim before ordering, since 2013 to 2018 Wrangler JK and other generations fall outside the 2007 to 2012 range.
Installation notes
The front alignment washers set caster, so schedule an alignment after the springs are installed. Any lift changes driveline angles, so check them during the installation.
What’s included
The kit includes front and rear replacement coil springs, front alignment washers, bump stops, a rear track bar bracket and extended sway bar end links.
Not included: shocks.






