Overview
The Rubicon Express RE7122FPR is a standard coil lift kit for the Jeep Wrangler JK. It comes with front and rear Fox Performance Resi shocks, which belong to the reservoir option of the FOX Performance Series.
The kit includes replacement coil springs at both ends, bump stops and cam bolts for setting caster and pinion angle. A front adjustable track bar and a rear track bar bracket are included, along with extended sway bar end links.
The lift height range is 2.5 to 3.5 inches. The FOX shocks are covered by the FOX warranty and are not eligible for the Rubicon Express Advantage Warranty.
Key features
- Front and rear Fox Performance Resi shocks
- Front and rear replacement coil springs
- Front and rear bump stops
- Cam bolts for caster and pinion adjustment
- Front adjustable track bar
- Extended sway bar end links
Setting caster and pinion
Caster and pinion angles decide how the driveline and steering behave after a coil lift. Cam bolts give a way to adjust those angles, which matter most when the lift changes the geometry of the front and rear axles. Setting them with a measuring tool, instead of guessing, gives a more predictable ride.
Wear points should be checked before the bolts are torqued. Bump stops that have crumbled, bushings that have split, and track bar ends with play can all change the way the axle sits. Replacing those parts together keeps the new springs working as the lift intended and makes the alignment easier to hold.
- Measure caster before final tightening
- Replace split bushings during install
- Recheck pinion angle after long trips
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7122FPR |
| Kit type | Standard coil lift kit |
| Lift height range | 2.5 to 3.5 inches |
| Shocks | Fox Performance Resi, front and rear |
| Springs | Front and rear replacement coil springs |
| Bump stops | Front and rear |
| Track bar | Front adjustable, with rear track bar bracket |
| Sway bar | Extended end links |
| Warranty | FOX warranty on the shocks |
Vehicle fitment
The kit is placed with the 2007–2018 Jeep Wrangler (JK), which covers the most popular Jeep JK suspension systems.
Other generations are not part of this fit, including the JL, the Gladiator, and the older TJ and LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Models from 2012 and newer may require an exhaust modification or a front drive shaft. Set caster and pinion with the cam bolts, then have the alignment checked.
What’s included
Front and rear replacement coil springs, bump stops, cam bolts, a front adjustable track bar, a rear track bar bracket, extended sway bar end links and front and rear Fox Performance Resi shocks.







