Select your vehicle
-13%

Rubicon Express 2.5″ Extreme-Duty Monotube Rear Shocks – RXJ905P

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express 2.5-inch Extreme-Duty Monotube rear shock, part number RXJ905P
  • Fits 2020 to 2026 Jeep Gladiator
  • Hard-anodized aluminum body with a 17-4 stainless steel shaft
  • Hydraulic, 2.5-inch body diameter
  • Cross-linked urethane bushings with steel sleeves

Description

Overview

The Rubicon Express 2.5-inch Extreme-Duty Monotube Rear Shock, part number RXJ905P, is a hydraulic rear shock for the 2020 to 2026 Jeep Gladiator. Rubicon Express says each part number is tuned to match its vehicle application.

The body is a hard-anodized, thick wall aluminum impact forging. The aluminum sheds heat quickly, and the hard anodizing reduces friction and bore wear while resisting rust, a problem steel bodies can have. The shaft is 17-4 stainless steel, precipitation hardened and chrome plated.

The shock pairs a hard-anodized aluminum body with steel sleeves inside cross-linked urethane bushings. It is hydraulic, with eyelet mounts at the top and bottom, and the body diameter is 2.5 inches. Each part number is matched to its vehicle application and is built for all types of terrain.

Key features

  • Hard-anodized thick wall aluminum body
  • 17-4 stainless steel precipitation hardened shaft
  • Chrome plated shaft for corrosion and abrasion resistance
  • Cross-linked urethane bushings with thick wall steel sleeves
  • 2.5-inch body diameter
  • Eyelet mounts at both ends

Shock tuning and wear

A rear shock controls how the axle moves over bumps and how the vehicle settles after a jump, and it works hardest on washboard roads and rough trails. Shocks wear over time, so a loss of control, a bouncy ride, oil on the body, or uneven tire wear can signal that the shock needs attention. Replacing the rear pair together keeps the ride even from side to side.

When comparing shock options, consider the mount style at the top and bottom, the body size, and whether the setup suits the rest of the suspension. Check the bushings and the mounting hardware when the shocks are off, and replace worn bushings at the same time. Keep the threads clean and check the bolts after the first few drives, since new mounts can settle in service.

Specifications

Brand Rubicon Express
Part number RXJ905P
Shock series Extreme-Duty Mono-Tube
Shock type Monotube
Hydraulic or gas charged Hydraulic
Body diameter 2.5 inches
Body material Hard-anodized aluminum
Shaft 17-4 stainless steel, chrome plated
Top and bottom mount Eyelet
Location Rear
Fitment label Direct Fit

Vehicle fitment

It fits the 2020 to 2026 Jeep Gladiator.

The fit covers the Gladiator only, so Wrangler JL fit is not confirmed. Confirm fit for your vehicle’s year, model and trim before ordering.

What’s included

The rear shock comes with cross-linked urethane bushings and thick wall steel sleeves. Check the mounting hardware against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–2026Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Are these gas or hydraulic shocks?

They are hydraulic shocks rather than gas charged units. The body diameter is 2.5 inches, and the shock uses eyelet mounts at the top and bottom, so it is a monotube design built for the Extreme-Duty series.

Do these shocks fit a 2020 Jeep Gladiator?

Yes. The shock fits 2020 to 2026 Jeep Gladiator models, including 2020, and it is a direct-fit part for those vehicles. Confirm fit for your vehicle's year, model and trim before ordering.

Do they fit a Wrangler JL?

The shock is fitted for the Gladiator only, so Wrangler JL fit is not confirmed. Before buying, compare your vehicle's mount style and year, model and trim against the listed fit.

How can I tell when rear shocks need replacing?

Look for oil on the shock body, a bouncy ride after bumps, uneven tire wear, or a loose feel at the mounts. Replace the shocks in pairs when one fails, so both ends of the axle respond the same way.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon