Overview
The King Shocks 20C001-373 is a front 2.0 Performance Series monotube shock for the 2018 to 2026 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator. It has a 2.0-inch body with OEM top and bottom mounts and is a direct fit at the front location.
The shock is custom tuned for the Jeep, with the damping curve and spring rate set through real-world testing. It bolts on at stock height, and custom lengths are available for trucks with lifted aftermarket suspensions.
Front suspension geometry
The front shocks work with the steering knuckles, control arms and track bar to keep the front tires planted. When a shock loses damping, the front end can feel loose over bumps, wander on the highway or bounce after a dip. Because the front end carries steering loads, a worn shock can also make the steering feel less predictable.
If you are replacing front shocks, look at the upper and lower mounts and the bushings at the same time. Worn bushings change how the shock moves and can cause early wear on a new shock. Tire wear patterns can also point to suspension wear, so an alignment check after the work is a practical step.
- Look for fluid on the front shock body
- Inspect upper and lower mounts
- Check tire wear patterns
- Get an alignment check after replacement
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST20C001-373 |
| Shock series | 2.0 Performance Series |
| Shock type | Monotube |
| Body diameter | 2.0 inches |
| Top mount | OEM |
| Bottom mount | OEM |
| Hydraulic or gas charged | Gas charged |
| Location | Front |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims, and the 2018 to 2026 Jeep Wrangler JL in the Rubicon, Sport and Sport S two-door trims and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door trims.
Earlier Wrangler generations and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is one front shock absorber. Confirm the single shock and its hardware suit your installation, since extra mounting hardware may be needed.









