Overview
The Skyjacker B8397 is a rear Black MAX shock absorber for the 2020–2026 Jeep Gladiator, built for a 3 to 3.5 inch lift. It is a twin tube hydraulic shock with eyelet mounts at both ends and is sold one shock at a time.
Skyjacker’s foam-cell design eliminates air inside the shock and allows it to be mounted at 180 degrees. The shock is built around vehicle-specific multi-stage valving, and the larger fluid capacity is intended to help the shock handle heat.
Key features
- Rear position for the Gladiator
- Built for a 3 to 3.5 inch lift
- Eyelet mounts at the top and bottom
- Vehicle-specific multi-stage valving
- Increased fluid capacity for MAX heat dissipation
- Black boot included
Why lift range matters
A lift range tells you how much the body was raised and how the shock length should be matched to the suspension. A shock sized for a higher lift may sit with too little preload on a lower setup, while one sized for a lower lift can run out of travel on a taller truck. Measuring the rear ride height on both sides before buying prevents those problems.
Once installed, a rear shock should be checked for leaks, noise and uneven wear over the first few weeks. Tire wear that follows the rear edge, or a rear end that keeps bouncing, can point to a shock or mount that needs attention.
- Measure rear ride height on both sides
- Check for leaks after the first few drives
- Watch for uneven rear tire wear
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYB8397 |
| Shock series | Black MAX |
| Position | Rear |
| Lift range | 3 to 3.5 inch |
| Mounting | Eyelet top and eyelet bottom |
| Shock type | Twin tube, hydraulic |
| Boot | Black, included |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator (JT), including Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S models.
The list does not cover the Wrangler JL or JK, or Gladiator years before 2020. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is built for a 3 to 3.5 inch lift, so check the lift on your Gladiator before ordering. Have the alignment checked after the replacement.
What’s included
The SKYB8397 comes with its black boot. Check the mounting hardware on your Gladiator before starting the installation.
Not included: a second SKYB8397 shock, sold separately.








