Select your vehicle
-13%

Rubicon Express 2.5″ Extreme-Duty Monotube Rear Shock – RXJ905

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear 2.5-inch extreme-duty monotube hydraulic shock
  • Fits 2020–2026 Jeep Gladiator models and trims
  • Hard anodized aluminum body with a chrome plated 17-4 stainless steel shaft
  • Eyelet top and bottom mounts with urethane bushings

Description

Overview

The Rubicon Express 2.5 inch extreme-duty monotube rear shock, part number RXJ905, is a hydraulic rear shock with eyelet mounts at the top and bottom. It is made for the 2020–2026 Jeep Gladiator.

The monotube body is hard anodized aluminum from an impact forging. Aluminum dissipates heat quickly, and the anodizing reduces friction and bore wear while avoiding the rust that steel bodies can develop. Each part number is tuned to its vehicle application.

In a monotube shock the oil and the gas charge share one body, separated by a piston, and the 2.5 inch body diameter is listed on the specifications below. Eyelets at both ends make the shock a straightforward rear mount.

The shaft is 17-4 stainless steel, precipitation hardened and chrome plated for corrosion and abrasion resistance. It runs in cross-linked urethane bushings with thick wall steel sleeves. Rubicon Express says each part number is tuned to its vehicle application.

Key features

  • Hard anodized aluminum body made from an impact forging
  • 17-4 stainless steel shaft, precipitation hardened and chrome plated
  • Cross-linked urethane bushings with thick wall steel sleeves
  • Monotube design with a 2.5 inch body diameter
  • Eyelet mounts at the top and bottom
  • Each part number is tuned to its vehicle application.

Monotube design explained

In a monotube shock, the oil and gas charge share one body and are separated by a piston. This layout keeps the damping consistent during long off-road runs, because heat has a single path out through the body rather than building up in a reserve tube.

Shock life depends on how the vehicle is driven and maintained. Rough trails, heavy loads and steep descents all push the shock harder. Checking the eyelets, bushings and shaft after each season helps catch wear early, and matching the shock to the suspension height keeps the ride balanced.

  • Keep the shaft clean of mud and grit
  • Check eyelet bolts after the first trail trips
  • Inspect bushings for cracks at each service
  • Replace worn shocks in pairs

Specifications

Brand Rubicon Express
Part number RXJ905
Series Extreme-duty mono-tube
Shock type Monotube, hydraulic
Location Rear
Body diameter 2.5 inches
Body material Hard anodized aluminum
Shaft 17-4 stainless steel, chrome plated
Top mount Eyelet
Bottom mount Eyelet
Bushings Cross-linked urethane with steel sleeves

Vehicle fitment

It fits the 2020–2026 Jeep Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.

The list covers 2020 to 2026 only, so other Gladiator years and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The rear shock with eyelet mounts and urethane bushings. Compare the package contents with your installation plan before starting.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–2026Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rubicon Express RXJ905 fit a 2020 Jeep Gladiator?

Yes. It fits the 2020–2026 Jeep Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims. Make sure your year and trim match before you order.

What mounts does the RXJ905 use?

Eyelet mounts at both the top and bottom. The body is a 2.5 inch diameter monotube, and the shaft is chrome plated 17-4 stainless steel.

Is the shaft resistant to corrosion?

The chrome plated 17-4 stainless steel shaft is built for corrosion and abrasion resistance. The aluminum body also avoids the rust that steel bodies can develop.

How should the shock be inspected?

Look for oil on the shaft, cracks in the urethane bushings and loose eyelet bolts. Wipe the shaft clean after muddy trips, and check that the shock moves smoothly through its full travel.

Do these shocks need a special cleaning routine?

Rinse the body and shaft with water after trail use to remove grit that can damage the seals. Avoid high-pressure spray directly at the seals, and dry the shaft before storing the vehicle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon