Overview
The Rubicon Express JT7100FP is a 2.5 to 3.5 inch standard arm suspension lift kit with FOX Performance Series 2.0 IFP shocks for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Launch Edition, Overland, Rubicon, Sport and Sport S trims.
The lift uses coil springs at the rear and a standard arm setup, with a lift height range of 0 to 3.5 inches. The specifications list a 35-inch tire size, and the FOX shocks are included at the front and rear.
It is a bolt-on upgrade that makes room for 37-inch tall tires. FOX Performance Series shocks are covered by the FOX warranty and do not qualify for the Rubicon Express Advantage Warranty. This kit number is for buyers who want FOX-branded shocks.
Key features
- FOX Performance Series 2.0 IFP shocks at the front and rear, included
- 2.5 to 3.5 inch standard arm suspension lift
- Coil spring rear lift method
- Room for 37-inch tall tires.
- Bolt-on design without driveshaft or exhaust changes, per the brand
Choosing and caring for shocks
Shocks control how quickly the springs settle after a bump, and a lift changes the geometry they work in. When a truck is raised, the shock angle and length change, so a shock matched to the new ride height keeps damping consistent across the travel range. Shocks at the front and rear should be chosen as a set so the truck does not feel mismatched at each end. Many owners consider how the truck will be used, whether mostly highway or rough trail, before choosing a firmer or softer valve tune.
Inspect shocks regularly for oil on the body, cracked bushings, and loose mounts. A shock that feels bouncy, or that leaves the tires chattering on washboard roads, may be worn. Replace shocks in pairs at each end, and recheck clearance at full compression after any change in tire size.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7100FP (JT7100FP) |
| Kit type | Standard arm suspension lift kit |
| Lift | 2.5 to 3.5 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Front shocks | FOX Performance |
| Rear shocks | FOX Performance |
| Rear lift method | Coil springs |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT in the Launch Edition, Overland, Rubicon, Sport and Sport S trims.
The list covers the Gladiator JT only, so the Wrangler and Gladiator years outside 2020–2026 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Standard arm kits change the axle location, so the alignment and driveline angles should be checked after the install. The FOX shocks are matched to the lift height in the kit, so keep the shock mounting hardware as supplied.
What’s included
The kit includes the FOX Performance Series 2.0 IFP shocks at the front and rear, and the standard arm suspension lift components.















