Overview
The Rubicon Express JT7104E is a 2.5 to 3.5 inch Sport suspension lift kit with geometry correction brackets and shock extensions for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Gladiator trims covered by this kit.
The lift is a coil spring system with a lift height range of 0 to 3.5 inches, and the tire size is 35 inches. It is a 100 percent bolt-on design that improves street handling and off-road capability.
The kit delivers more on-road and off-road performance without changing driveshafts or modifying exhaust or brake lines. It makes room for 37-inch tall tires.
Key features
- 2.5 to 3.5 inch Sport suspension lift
- Geometry correction brackets with shock extensions
- Coil spring rear lift method
- Bolt-on design, with no driveshaft or exhaust changes needed, per the brand
- Room for 37-inch tall tires.
Shock extensions and alignment
Shock extensions change the length a shock operates at, so they work best when the shock body and mounting points are checked against the lifted height. Shocks are not part of this kit, which means the replacement shocks you choose must match the extended travel. Look for a shock with enough stroke and a mount that suits the extension hardware. Shock choice also affects ride quality, since a stiffer valve setting can feel harsh on a coil spring truck.
Geometry correction brackets alter control arm position, so the front and rear angles usually need a check after installation. Uneven tire wear, a pull under braking, or a steering wheel that sits off center are common signs the alignment needs attention. Inspect bushings and the bracket bolts after the first few drives and after any hard off-road use. Keep the old shock bushings and hardware in good condition, since a worn mount can shift the lifted geometry over time.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7104E (JT7104E) |
| Kit type | Sport suspension lift kit |
| Lift | 2.5 to 3.5 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | No |
| Shock series | None listed |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT in the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The list covers the Gladiator JT from 2020 through 2026 only, so the Wrangler and earlier Gladiator years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Geometry correction brackets change the control arm position, so the alignment and the shock extension lengths should be checked after the install. Shocks are not included, so the shock extensions need to fit the shocks you already run.
What’s included
The specifications describe the lift kit with geometry correction brackets and shock extensions. Shocks are not included.
Not included: shocks.















