Overview
The Rubicon Express RE7145P is a 3.5-inch progressive coil sport lift kit for the Jeep JK, sold without shocks. Its sport design corrects steering and control arm geometry that a lift can disturb, which reduces bump steer and increases anti-dive for better braking. The kit includes a new high steer kit, control arm correction brackets and rear cam bolts for pinion adjustment.
It fits any 07+ JK or JK Unlimited with a 3.5-inch suspension lift, placing it on the 2007-2018 Jeep Wrangler (JK). The kit includes 3.5-inch front and rear replacement springs, a rear track bar bracket, bump stops and extended sway bar end links. Because shocks are not included, reuse your existing shocks or buy a separate set. It can be upgraded to the Super-Flex system later.
Key features
- 3.5-inch lift height with progressive coil springs
- New high steer kit with a solid drag link
- Steering stabilizer relocated above the drag link
- Control arm geometry correction brackets
- Rear cam bolts for pinion angle adjustment
- Rear track bar bracket
- Bump stops and extended sway bar end links
- Easy upgrade path to the Super-Flex system
Choosing shocks and steering checks
Because the kit ships without shock absorbers, the shock choice belongs in the planning stage. Inspect your current shocks for leaks, worn bushings and cracked mounts before reinstalling them. Many owners replace the shocks at the same time as the springs, since a lift changes the length and angle the shocks work through, and a matched set keeps damping consistent across the new travel range.
Steering parts deserve the same attention. A high steer setup changes the angles that the drag link and tie rod ends operate under, so inspect the ends and boots for play after the first few trail runs. Re-torque the sway bar end link and track bar bracket fasteners once the suspension has settled, and recheck alignment any time the steering linkage has been adjusted.
- Check shock mounts and bushings before reuse
- Inspect tie rod ends and boots for play
- Re-torque suspension fasteners after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7145P |
| UPC | 700008140271 |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Coil springs | Progressive, 3.5-inch front and rear replacement |
| Shocks | Not included |
| Made in | USA |
Vehicle fitment
It fits any 07+ JK or JK Unlimited with a 3.5-inch suspension lift, which covers the 2007-2018 Jeep Wrangler (JK). Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The high steer kit and correction brackets change steering and control arm geometry, so the alignment should be checked after installation. The rear cam bolts adjust pinion angle and should be confirmed at the end of the job.
What’s included
The kit includes the new high steer kit, control arm geometry correction brackets, rear cam bolts, progressive 3.5-inch front and rear coil springs, the rear track bar bracket, bump stops and extended sway bar end links.
Not included: shock absorbers.






