Overview
The Rubicon Express JK4343PM is a 3.5-inch extreme-duty long arm lift kit with progressive coils and monotube shocks. It fits the 2007-2018 Jeep Wrangler (JK) and belongs to Rubicon Express’s JK suspension line. It uses the same chromoly control arm set, Super-Flex joints and PT-Meg Super-Ride bushings as the JK4343P, with monotube shocks added.
Progressive coils have a longer extended length than linear coils, which maximizes droop travel. Their spring rate increases gradually, giving a smoother ride over small bumps and enough rate to limit harsh bottoming at full compression. The full-width transmission crossmember adds rigidity, and the install needs no welding.
Key features
- 3.5-inch lift height
- Progressive coil springs
- Monotube shocks included
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Extreme-duty 4-link front and 3-link rear long arm layout
Progressive springs on a long arm
Progressive springs change rate as they compress, so the ride starts soft and gets firmer deeper into the stroke. On a long arm system that can help the suspension stay composed over small bumps and still resist harsh bottoming at full compression. The spring shape and length also affect how far the axle can droop, which matters on uneven ground.
Spring seats and isolators should be checked when the springs are installed, since a seated spring with the wrong height can change the ride. After the first drives, recheck the lift height and make sure the springs are sitting square in their seats. Over time, inspect the springs for cracked coils and sagging. Pair the spring check with the shocks and bump stops, because they share the load as the suspension moves.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4343PM |
| UPC | 700008140211 |
| System type | Extreme-duty 4-link front and 3-link rear long arm with progressive coils |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Spring type | Progressive coil |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Monotube, included |
Vehicle fitment
Fits the 2007-2018 Jeep Wrangler (JK). The TJ, LJ and JL generations are outside this kit’s coverage. Confirm your vehicle’s year, model and trim before ordering.
The TJ, LJ and JL generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-link front and 3-link rear arms change control arm angles and pinion geometry, so the alignment and driveline angles should be checked once the lift is installed.
What’s included
The kit includes the adjustable chromoly control arms, progressive coil springs, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings, the full-width transmission crossmember and monotube shocks.
The monotube shocks are included, so this version is the complete package with progressive coils and the same arm set as the JK4343P. Optional belly pan and steering knuckle upgrades remain available, and the kit gives a 3.5-inch lift.
The progressive coils are the spring design, and the monotube shocks finish the package with the same arm set.
