Overview
The Rubicon Express RE7002T is a standard 3.5 inch suspension lift for the Jeep TJ or LJ. It is offered as an economical choice for an entry-level owner or a buyer on a smaller budget.
The standard lift system uses new coil springs, bump stops and extended sway bar end links. The stock control arms and track bar are kept in place, so the factory layout stays largely intact. The kit is intended to ride comfortably on and off the trail.
The kit can be upgraded to a 3.5 inch or 4.5 inch Super-Flex system later. The Rubicon Express Advantage lifetime warranty applies to the kit.
Key features
- Front and rear replacement coil springs
- Bump stops
- Rear track bar bracket
- Extended sway bar end links
- Upgrade path to a 3.5 or 4.5 inch Super-Flex system
- Rubicon Express Advantage lifetime warranty
Keeping the stock arms aligned
This standard coil kit keeps the stock control arms and track bar, so the factory suspension geometry is largely retained. That makes the alignment check after installation especially important, because the new springs change ride height and can shift caster and toe slightly.
Inspect the stock control arm bushings and ball joints before installing new springs. Worn bushings can make the new ride feel loose, and a track bar with play can cause steering wander. Replacing aged parts at the same time gives a more predictable result on and off the trail.
Bump stops and sway bar end links are wear items. Look for cracks in the rubber, bent links and split boots, and replace them as they show wear. Tires with even tread wear help confirm the alignment is holding. Keep a simple service log so you can spot changes over time.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7002T |
| Kit type | Standard kit |
| Lift height | 3.5 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Springs | Replacement coil springs, front and rear |
| Bump stops | Included |
| Sway bar | Extended end links |
| Warranty | Rubicon Express Advantage lifetime warranty |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) Unlimited.
It is made for TJ and LJ models, not the JK, JL or Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock control arms and track bar are retained, so the alignment should be checked after the new springs are installed.
What’s included
Front and rear replacement coil springs, bump stops, a rear track bar bracket and extended sway bar end links.






