Overview
The Rough Country V2 rear monotube shock R/C760809_A is a nitrogen-charged rear shock for 2018–2026 Jeep Wrangler JL models with a 0 to 1 inch lift. Its T6061 brushed aluminum body has black anodized accents, and it is a direct-fit part.
A floating piston inside the shock keeps the nitrogen and oil apart, which Rough Country says results in a quick response with no cavitation. The internal piston is a 46mm high-flow design. The V2 is meant to be mounted body-up, and the body is said to dissipate heat faster than other materials. Because the lift is only 0 to 1 inch, the shock suits a truck at or close to stock height, and the rear ride height should be checked before ordering. The listed fitment covers the two-door and four-door bodies.
Key features
- Monotube body with nitrogen charge
- Internal floating piston separates oil and nitrogen
- T6061 brushed aluminum body with black anodized accents
- 46mm high-flow internal piston
- Body built to shed heat quickly.
- Designed for body-up mounting
Rear shocks and small lifts
On a Wrangler JL with a small lift, the rear shocks are often the part that decides how the truck settles over bumps. Rear shocks control the rebound of the axle when the wheels drop into a rut, and they help keep the tires in contact with the ground on uneven trail surfaces. Because the change in height is small, the shock works in a narrow range, so the rear ride height should be checked before installing.
Good installation habits matter as much as the part itself. Look at the lower mount for cracks, make sure the upper bushing sits flat, and confirm the shock clears the spare tire carrier and brake lines at full extension. Check the bolts again after the first drives, and inspect the shock body for oil or dents as part of routine service.
- Check the rear ride height before installing
- Inspect lower mounts for cracks
- Confirm clearance to brake lines at full extension
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C760809_A |
| Product line | V2 Series |
| Shock type | Monotube |
| Position | Rear |
| Lift height | 0-1 in. |
| Body material | T6061 brushed aluminum with black anodized accents |
| Piston | 46mm high-flow, internal floating design |
| Charge | Nitrogen |
| Mounting | Body-up |
| Fitment | Direct fit |
Vehicle fitment
Fits the 2018–2026 Jeep Wrangler JL in two-door and four-door Rubicon, Sport, Sport S, Sahara, Willys and High Altitude models, including 4xe and 392 versions. It is sized for a 0 to 1 inch lift.
The list covers the JL generation only, so earlier Wrangler models and the Gladiator are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the shock body-up, and check the rear ride height on your Wrangler against the 0 to 1 inch range before installing.
What’s included
One rear V2 monotube shock, part number R/C760809_A.









