Overview
The Rough Country N3 front shock R/C23238_C is a nitrogen-charged twin-tube shock for Ford F-150 pickups from 1977 to 2003 and the F-150 Lightning in 1993–1995 and 1999–2003. It is built for a lift of 3 to 4.5 inches and uses a stud at the top and a bar pin at the bottom.
The extended length is 18.80 in and the compressed length is 11.57 in. The 35mm piston, 18mm chrome-hardened piston rod and 54mm body match the other N3 front shocks, and the ten-stage variable valving keeps the damping steady across speeds. The bar pin bottom mount is the main thing to check on an older truck.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston with an 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal and rubber bushings
- Military spec damper fluid
Bar pin mounts on older trucks
On an older F-150, the lower mount is often the part that has seen the most movement. A bar pin connection can wear loose over time, which lets the shock rattle and change its damping feel. Before fitting, compare your existing lower mount with the bar pin and look for elongated holes, cracked welds and missing bushings.
Because this shock is sized for a 3 to 4.5 inch lift, the front end will be higher than stock. That changes how the suspension compresses and how the shock is loaded at full extension. Set the truck on level ground, let the suspension settle, and check the front alignment after installation. Replace both shocks together so the ride stays even from side to side.
- Inspect the bar pin for wear
- Check the stud top mount for play
- Look for cracked frame or bracket welds
- Recheck torque after the first week of driving
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23238_C |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 3-4.5 in. |
| Top mount | Stud |
| Bottom mount | Bar pin |
| Extended length | 18.80 in |
| Compressed length | 11.57 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits Ford F-150 pickups from 1977 to 2003 in a wide range of cab, bed and trim packages, plus the F-150 Lightning for 1993–1995 and 1999–2003. It is sized for a lift of 3 to 4.5 inches.
The list does not include F-150 pickups from 2004 and later, or the 1996–1998 F-150 Lightning gap years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare your existing lower shock mount with the bar pin before ordering. Check the front alignment after the lift is installed.
What’s included
Sold as a pair: two N3 front shocks, one for each side. Fit both shocks together so the damping matches on each side.









