Overview
The Rough Country N3 front shock R/C23292_A is a nitrogen-charged twin-tube shock for 1969–1988 Chevrolet and GMC C/K-series pickups and Suburbans with a 2 to 3 inch lift. It uses eyelets at both the top and the bottom, so it is an eyelet-to-eyelet replacement.
It fits Chevrolet C20, K20, R20 and V20 pickups, GMC C25 and K25 pickups, and the K2500 with its Suburban bodies. Extended length is 21.5 in and compressed length is 13.74 in. The 35mm piston, 18mm chrome-hardened piston rod and ten-stage variable valving match the rest of the N3 front range.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston with an 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal and rubber bushings
- Military spec damper fluid
Eyelet mounts and lift geometry
An eyelet-to-eyelet shock is simple to fit, but the bushings at both ends carry the full load of the damper and any lift angle. Worn eyelet bushings can allow the shock to rock side to side, which wears the bushing faster and makes the steering feel loose. Inspect both ends before fitting, and replace any bushing that shows cracks, flattening or wear.
Because a 2 to 3 inch lift changes the front axle angle, check the steering and alignment after installing the new shocks. Older C/K pickups often carry a mix of original and replacement hardware, so take a moment to confirm the bolts, sleeves and brackets are the right size before fitting.
- Replace flattened or cracked eyelet bushings
- Check sleeves and bolts for correct size
- Inspect the axle brackets for cracks
- Recheck torque after the first few drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23292_A |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 2-3 in. (with lift) |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Extended length | 21.5 in |
| Compressed length | 13.74 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits 1969–1986 Chevrolet C20, K20 and related pickups and Suburbans, 1987–1988 Chevrolet R20 and V20 Suburbans, 1975–1978 GMC C25 and K25 pickups and Suburbans, and 1969–1974 and 1979–1986 GMC C25, C2500 and K2500 models. It is sized for a 2 to 3 inch lift.
The list does not cover Ford or Dodge trucks, or Chevrolet and GMC trucks from 1989 and later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift changes the front geometry, have the alignment checked once the shocks are installed. Check that the eyelet mounts match your existing brackets before ordering.
What’s included
Sold as a pair, with one N3 front shock for each side.









