Overview
The Rough Country N3 front shock R/C23193_G is a nitrogen-charged twin-tube shock for 2002–2005 Dodge Ram 1500 trucks with a 5.5 to 6.5 inch lift. It uses a stud at the top and an eyelet at the bottom, and it is sold as a pair.
This is the Ram 1500 version of the N3 front shock family. It shares the 35mm piston, 18mm chrome-hardened rod and 54mm body with the other N3 front shocks, but its lift range is set higher. The extended length is 22.17 in and the compressed length is 13.74 in.
Key features
- Nitrogen charged for steady damping
- 10-stage variable valving
- 35mm piston with an 18mm chrome-hardened piston rod
- 54mm shock body for heat dissipation
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings and military spec damper fluid
Matching shocks to your lift
A front shock controls how quickly the springs compress and rebound, which shapes steering feel on pavement and body control over washboard and broken ground. Once a truck is lifted, the front shocks work at a longer stroke and at a different angle, so the correct length and mounting geometry matter as much as the damping rating.
Replace both front shocks at the same time. An old shock on one side will damp differently from a new one on the other, which can pull the truck under braking or on uneven ground. Before fitting, look over the upper stud, the lower eyelet and the surrounding brackets for bending, cracks and worn bushings, since a damaged mount can throw off the new shock’s position even when the shock itself is sound.
- Inspect rubber bushings for cracks, hardening or oil
- Look for fluid seeping past the rod seal
- Tighten fasteners to the torque value in your vehicle service manual
- Recheck hardware after the first few trail runs
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23193_G |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 5.5-6.5 in. |
| Top mount | Stud |
| Bottom mount | Eyelet |
| Extended length | 22.17 in |
| Compressed length | 13.74 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits 2002–2005 Dodge Ram 1500 trucks across their cab and trim packages. It is sized for a lift of 5.5 to 6.5 inches.
The list covers 2002–2005 Ram 1500 trucks only. Later Ram 1500 generations, Ram 2500 and Ram 3500 trucks are not included, and the smaller-lift N3 front shocks are separate parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift raises the front end, have the front alignment checked once the shocks are fitted. Make sure the top stud and eyelet bottom mount line up with your lift components before installation.
What’s included
Sold as a pair, with one N3 front shock for each side. Fit both together so the damping matches on each side.









