Overview
The Rough Country N3 Front Shocks, part number R/C23217_A (model 23217_A), are twin-tube, gas-charged front shocks for the 2018–2026 Jeep Wrangler (JL) on models with 0-1.5″ of lift. Rough Country markets the N3 line as a performance shock that balances off-road control with highway ride quality.
This front shock uses 10-stage variable valving, a 35mm piston and a chromed hardened 18mm piston rod inside a 54mm body that is built to dissipate heat faster. The pair has eye-type top and bottom mounts and a metallic silver finish.
Key features
- 10-stage variable valving
- High-pressure nitrogen-charged twin-tube design
- 35mm piston with a chromed hardened 18mm piston rod
- 54mm shock body to dissipate heat faster
- 36kN tensile strength, with a spring-loaded piston rod seal
- Military-spec fluid rated to 40 C
- Rubber bushings for better absorption
- Metallic silver paint and a 3-year warranty
Choosing N3 shocks for lift
Front shocks control how the suspension handles bumps, body roll and braking, so the right shock matters more on a lifted or heavily used Wrangler. Gas-charged twin-tube designs keep damping steadier as the shock heats up on long descents and repeated hits. Valving that can be tuned in several stages gives a firmer or softer feel depending on how the vehicle is used.
Match the shock to the lift height and the way the vehicle is driven. A lift changes the shock’s angle and length, so measure the installed range before buying. Bushings and mounts wear over time and affect steering feel, so inspect them when the shocks are replaced.
- Replace front shocks in pairs for even handling
- Check bushings and eye mounts during installation
- Recheck torque on mounting bolts after the first drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23217_A |
| Shock series | N3 Performance |
| Location / position | Front |
| Shock type | Twin tube, gas charged |
| Lift height | 0-1.5 in. |
| Top mount | Eye (eyelet) |
| Bottom mount | Eye (eyelet) |
| Extended length | 25.98″ in the short list; 25.87 in in the attribute list |
| Compressed length | 15.79 in |
| Body diameter | 54mm |
| Piston | 35mm piston, 18mm chromed hardened piston rod |
| Tensile strength | 36kN |
| Fluid | Military-spec, rated to 40 C |
| Bushings | Rubber |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty |
| Supplied as | A pair |
Vehicle fitment
The N3 front shock R/C23217_A fits the 2018–2026 Jeep Wrangler (JL), in 2-door and 4-door (Unlimited) versions, including 80th Anniversary, Freedom, Islander, High Altitude, Moab, Rubicon, Rubicon 392, Sahara, Sahara Altitude, Sport, Sport Altitude, Sport S, Willys, Willys Sport and 4xe trims. It is intended for vehicles with 0-1.5″ of lift.
It fits the 2018–2026 Wrangler JL. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A professional install is the safer choice, since shocks affect handling. Use jack stands on level ground and never work under a vehicle held up by a jack alone. Tighten fasteners to torque specifications and recheck them after a few miles of driving. Get an alignment after installation and make sure brake lines, cables and wiring have room through the suspension’s travel.
What’s included
A pair of front shocks. Check the package contents against your installation before starting.
Not included: Rear shocks, springs and lift components.









