Overview
The Rough Country V2 front monotube shock R/C760815_A is a nitrogen-charged monotube shock for Dodge Ram 2500 and Ram 3500 trucks from 2003 to 2026 with a 5 inch lift. It has a T6061 brushed aluminum body with black anodized accents and is a direct-fit part.
The floating piston keeps the oil and high-pressure nitrogen separate, which helps prevent cavitation and supports a quick response. The internal piston is 46mm and high-flow. The V2 is designed for body-up mounting, and the body dissipates heat quickly. Confirm the mounting points on your truck match the body-up orientation before ordering.
Key features
- Monotube body with nitrogen charge
- Internal floating piston separates oil and nitrogen
- T6061 brushed aluminum body with black anodized accents
- 46mm high-flow internal piston
- Body designed to dissipate heat faster.
- Designed for body-up mounting
Alignment after a 5 inch lift
A larger lift changes the angle of the front suspension and steering linkage, which affects how the truck tracks and how the tires wear. A front shock is one part of that system, and its damping has to work with the new geometry. Drivers who lift a Ram often notice a change in steering feel, so the alignment and steering components should be checked once the work is finished.
Before installing, inspect the steering linkage, tie rod ends and ball joints for play, since these parts take more load after a lift. Make sure the shock is mounted body-up before tightening the bolts. After the first few drives, check for uneven tire wear, a pull to one side, or a front end that keeps bouncing, as these can point to an alignment issue or a shock that needs attention.
- Inspect tie rod ends and ball joints
- Confirm body-up orientation before tightening
- Check alignment after the first few drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C760815_A |
| Product line | V2 Series |
| Shock type | Monotube |
| Position | Front |
| Lift height | 5 in. lift |
| Body material | T6061 brushed aluminum with black anodized accents |
| Piston | 46mm high-flow, internal floating design |
| Charge | Nitrogen |
| Mounting | Body-up |
| Fitment | Direct fit |
Vehicle fitment
Fits the 2003–2010 Dodge Ram 2500 and Ram 3500 across their Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX models, the 2011–2013 Ram 2500, and the 2011–2026 Ram 3500 in Big Horn, Laramie, Limited, Lone Star, SLT, ST and Tradesman models. It is sized for a 5 inch lift.
The list does not include Ram 1500 trucks or 2014 and newer Ram 2500 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift is 5 inches, check the front alignment and steering geometry after installation. Confirm the front shock is mounted body-up before the bolts are tightened.
What’s included
One front V2 monotube shock, part number R/C760815_A.










