Overview
The Rough Country N3 rear shock R/C23153_B is a nitrogen-charged rear shock for 2003–2013 Ram 2500 trucks with a 3.5 to 6 inch lift. It uses eyelets at the top and bottom and is sold as a pair.
This is the Ram 2500 version of the 23153 rear shock. Its extended length is 30.08 in and its collapsed length is 17.87 in, the same dimensions as the Ram 3500 version, while the lift range is 3.5 to 6 inches. The unit has a 35mm piston, an 18mm chrome-hardened piston rod, a 54mm body and ten-stage variable valving.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings for better absorption
Signs the rear shocks need replacing
Rear shocks control how the axle settles after a bump and how the truck rebounds through corners. Over time the damping fluid and seals wear, and the ride starts to feel bouncy or floaty, especially on washboard roads. Fluid leaking down the shock body is a clear sign of seal failure, and so is a shock that feels loose at the eyelet when pushed by hand.
When replacing rear shocks on a lifted truck, check the bushings, mounting hardware and the rear track bar at the same time. Worn bushings change the geometry the shock works against, so replacing them alongside the shocks keeps the ride predictable. Re-torque the mounting bolts after the first few drives and recheck alignment once the new pair has settled.
- Oil or fluid streaks along the shock body
- Excess bounce after speed bumps
- Worn eyelet bushings or loose mounts
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23153_B |
| Product line | N3 Performance |
| Position | Rear |
| Lift height | 3.5-6 in. |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Extended length | 30.08 in |
| Collapsed length | 17.87 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | Covered by a 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It is a direct fit for 2003–2010 Dodge Ram 2500 and 2011–2013 Ram 2500 trucks across their cab and trim packages. It is sized for a 3.5 to 6 inch lift.
The list does not cover Ram 3500 trucks or 2014 and newer Ram 2500 trucks, which use different rear shocks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the rear alignment and ride height once the shocks are fitted. Confirm the eyelet mounts match your rear axle brackets before ordering.
What’s included
Sold as a pair, with one rear shock for each side.









