Overview
The Rough Country N3 front shock R/C23244_F is a nitrogen-charged monotube shock for 1983–1997 Ford Ranger pickups with a 1.5 to 2 inch lift. It uses a stud at the top and an eyelet at the bottom, and it is sold as a pair.
Monotube shocks use a single tube with the gas and fluid separated inside it, which differs from the twin-tube layout of most of the other N3 front shocks in this range. The extended length is 16.46 in and the compressed length is 11.57 in. The 35mm piston, 18mm chrome-hardened piston rod and 54mm body follow the N3 design, so the shock keeps the same build quality across the front line.
Key features
- Monotube design with nitrogen charge
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal and rubber bushings
- Military spec damper fluid
Monotube versus twin-tube
A monotube shock separates gas and fluid inside a single tube, which can help it keep damping steadier as the unit heats up over long runs. Twin-tube designs use an outer reserve tube and are more common across factory and aftermarket shocks, so the two types feel different in certain conditions even when they are rated similarly.
For a Ranger, the choice between types mostly comes down to where the truck is driven. Matching the shock type on both fronts keeps the ride consistent, and any change in type should be checked against the mounts and the lift height. Fit both fronts together and keep the old bushings in good condition, since worn rubber can soften the damping feel.
- Keep both fronts the same type
- Check stud and eyelet mounts for wear
- Note the lift range before ordering spares
- Inspect the rod seal after rough trail use
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23244_F |
| Product line | N3 Performance |
| Shock type | Monotube |
| Position | Front |
| Lift height | 1.5-2 in. |
| Top mount | Stud |
| Bottom mount | Eyelet |
| Extended length | 16.46 in |
| Compressed length | 11.57 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits the 1983–1997 Ford Ranger across its base, sport, XL, XLT and XLS models, including the STX and Splash trim packages from those years. It is sized for a 1.5 to 2 inch lift.
The list covers 1983–1997 Ranger pickups only, so the 1998 and newer Ranger is not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the eyelet mount and stud against your existing shock before installation. Verify the front alignment after the lift is in place.
What’s included
Sold as a pair: two N3 monotube front shocks, one for each side.









