Overview
The Rough Country V2 front monotube shock R/C760808_A is a nitrogen-charged front shock for 2018–2026 Jeep Wrangler JL models with a 0 to 1.5 inch lift. It has a monotube design and a T6061 brushed aluminum body, and it is a direct-fit part.
An internal floating piston keeps the oil and high-pressure nitrogen apart, which helps the shock respond quickly and resist cavitation under load. The 46mm high-flow piston sits inside the body. The V2 is designed for body-up mounting. Two-door and four-door Wranglers are both covered, so check your body style before ordering.
Key features
- Monotube body with nitrogen charge
- Internal floating piston separates oil and nitrogen
- T6061 brushed aluminum body with black anodized accents
- 46mm high-flow piston
- Body said to dissipate heat faster than other materials
- Designed for body-up mounting
Front suspension and lift height
The front shocks on a Wrangler JL control body motion on the road and help keep the tires in contact during off-road articulation. Because the front axle steers and carries much of the engine weight, a worn front shock can make the steering feel loose or cause the front end to wander at highway speed. A monotube design separates the oil and gas in a single tube, which many drivers find more consistent after repeated hard use.
When choosing a front shock, check that the lift range matches the height of the truck. Sway bar links and track bar bushings are often replaced alongside front shocks on a lifted Wrangler, since worn links can change how the suspension moves. After installation, inspect the mounting hardware, check that the shock clears the steering components, and recheck the bolts after the first few trail runs.
- Replace sway bar links if they show play
- Check track bar bushings during shock work
- Recheck mounting bolts after early trail use
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C760808_A |
| Product line | V2 Series |
| Shock type | Monotube |
| Position | Front |
| Lift height | 0-1.5 in. |
| Body material | T6061 brushed aluminum with black anodized accents |
| Piston | 46mm high-flow, internal floating design |
| Charge | Nitrogen |
| Mounting | Body-up |
| Fitment | Direct fit |
Vehicle fitment
Fits the 2018–2026 Jeep Wrangler JL in two-door and four-door Rubicon, Sport, Sport S, Moab, Willys, Sahara and High Altitude models, including 4xe and 392 versions. It is sized for a lift of 0 to 1.5 inches.
The list covers the JL generation only, so the earlier Wrangler models and the Gladiator are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is designed for body-up mounting, so check the orientation against the front shock it replaces. Confirm the lift height on your truck falls within the 0 to 1.5 inch range.
What’s included
One front V2 monotube shock, part number R/C760808_A.









