Overview
The Rough Country 3-inch Nissan bolt-on lift kit, part number R/C83431, fits the 2017–2021 Nissan Titan in the PRO-4X, Platinum Reserve, S, SL and SV versions. It is a 3-inch bolt-on kit that lifts both the front and the rear of the truck.
The kit uses tubular upper control arms designed to make alignment adjustments easier. The arms have Clevite rubber bushings, and the brand says their geometry keeps the ball joint at optimum angles after lifting for a greater range of motion with less stress and wear.
Strut spacers at the front and fabricated rear blocks provide the lift from front to rear. With the kit installed, the truck has ride height for tires up to 33 inches, and the bolt-on installation needs no cutting or drilling.
The tubular upper control arms are the front geometry parts in the kit, and they set the upper pivot angles that the lift depends on. The Clevite bushings sit at the pivot points and absorb movement between the arm and the frame.
Strut spacers raise the top of each front strut without changing the strut itself, while fabricated rear blocks add height between the rear springs and the axle. Together they lift the truck from front to rear.
Alignment should be checked after installation. The wheels should be test fitted with the 33-inch tires before the truck is driven on rough terrain, since the wheel offset and backspacing decide how the tires clear the body.
Key features
- Tubular upper control arms
- Clevite rubber bushings
- Strut spacers for the front
- Fabricated rear blocks for the rear
- Bolt-on installation with no cutting or drilling
- Clearance for tires up to 33 inches
Before you buy
Strut spacers and rear blocks are common lift parts, and they change how the front and rear of a truck carry load. Before buying, think about how much tire you plan to run and whether the stock wheels will clear the lifted position. Wheel offset and backspacing often matter more than the lift number itself.
Upper control arms affect the pivot angles that the lift depends on. Expect the alignment to need a check after any change in ride height, and replace worn bushings when the old arms come out, since a loose pivot undoes the geometry the kit is meant to restore.
- Test fit the wheels with the planned tires before off-road use
- Inspect the frame and body mounts for clearance
- Replace worn shocks when the lift is added
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C83431 |
| Lift size | 3 inches |
| Upper control arms | Tubular with Clevite bushings |
| Position listed | Front |
| Tire clearance | Up to 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2017–2021 Nissan Titan in the PRO-4X, Platinum Reserve, S, SL and SV versions.
Titan model years before 2017 and the Titan XD are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Tubular upper control arms with bushings, strut spacers and fabricated rear blocks, with the hardware for a bolt-on installation.










