Overview
The Rough Country N3 front shock R/C23283_A is a nitrogen-charged twin-tube shock for the 1987–1995 Jeep Wrangler (YJ) with a 3.5 to 6 inch lift. It mounts with a stud at the top and an eyelet at the bottom.
The extended length is 28.640 in and the compressed length is 16.91 in. The unit combines a ten-stage variable valving circuit with a nitrogen charge, and it uses an 18mm chrome-hardened piston rod inside a 35mm piston.
Key features
- Nitrogen charged for steady damping
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings and military spec damper fluid
Steering geometry after a lift
A YJ front end is sensitive to changes in height, and the shock’s angle affects how the axle moves through its travel. When a lift is added, the steering geometry shifts, so the shocks should be fitted with the alignment in mind and the bracket bolts snug but not overtightened before the truck is driven.
Replacing the front shocks on a YJ is a good time to inspect the steering components, including the tie rod ends, the drag link and the pitman arm, since looseness there can make a new shock feel vague. Work through the suspension in order, and keep the stud and eyelet mounts clean so each connection seats fully.
- Check tie rod ends for play
- Inspect the drag link and pitman arm
- Clean the stud top mount before fitting
- Recheck alignment after the first drive
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23283_A |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 3.5-6 in. |
| Top mount | Stud |
| Bottom mount | Eyelet |
| Extended length | 28.640 in |
| Compressed length | 16.91 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) across its base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport models. It is sized for a 3.5 to 6 inch lift.
The list covers the YJ generation only, so the TJ and later Wrangler models and the Cherokee are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifting a YJ changes the front geometry, so have the alignment and steering angles checked once the new shocks are in place. The stud top mount and eyelet bottom mount should line up with the existing brackets before the shock is fully tightened.
What’s included
Sold as a pair, with one N3 front shock for each side of the Wrangler. Replace both at the same time so the front suspension matches side to side.









