Overview
The Rough Country 3-inch Ford bolt-on suspension lift kit, part number R/C54557, fits the 2014–2021 Ford F-150 in the FX4, King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, STX, Tremor, XL and XLT versions. It gives an easy-to-install lift with an aggressive stance and a level look from front to rear.
Forged aluminum upper control arms with Clevite rubber bushings keep the ball joint at angles suited to the lift, which allows a greater range of motion with less stress and wear. The arms are the main geometry change at the top of the front suspension.
The kit includes N3 lifted struts, N3 nitrogen-charged shocks and fabricated rear blocks that provide the rear lift. With the kit installed, the truck has ride height for tires up to 34 inches.
Key features
- Forged aluminum upper control arms
- Clevite rubber bushings
- N3 lifted struts at the front
- N3 nitrogen-charged shocks
- Fabricated rear blocks
- Option to retain stock wheels with a 0.25-inch wheel spacer
Choosing lift and tire size
A suspension lift changes how the truck sits and how much room the tires have in the wheel wells. Taller tires need clearance at the fenders, inner liners and steering components, and the lift height sets how far a tire can move before it rubs. When matching tires to this kit, consider overall diameter, width, wheel offset and backspacing, since those decide whether the tire clears the body at full steering lock.
Upper control arms and struts change the front geometry, so alignment matters more after this type of lift than after a simple leveling setup. Expect to check caster and toe, and keep the first trail runs gentle while the new components settle under load.
- Re-check lug nuts and bolts after the first few drives
- Inspect bushings for cracks at each service interval
- Watch for leaks or uneven wear on the new shocks
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C54557 |
| Lift size | 3 inches |
| Upper control arms | Forged aluminum with Clevite bushings |
| Front components | N3 lifted struts |
| Shock series | N3 nitrogen-charged |
| Rear lift component | Fabricated blocks |
| Tire clearance | Up to 34 inches |
| Wheel spacer option | 0.25-inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2014–2021 Ford F-150 trucks in the FX4, King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, STX, Tremor, XL and XLT versions. Confirm fit for your vehicle’s year, model and trim before ordering.
F-150 model years before 2014 and the 2022 model year are not on the list, and Ford Super Duty trucks are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is a 100% bolt-on process with no cutting or drilling, and common tools in a home garage are enough. Have the alignment checked after installation, since the upper arms change front geometry.
What’s included
Forged aluminum upper control arms, N3 lifted struts, N3 shocks, fabricated rear blocks and the bushings for the arms.









