Overview
The Rough Country R/C28020 is a 6-inch non-torsion drop suspension lift for the 2000–2006 Chevrolet Tahoe, 2000–2006 GMC Yukon and 2002–2006 Cadillac Escalade Base. The non-torsion drop design replaces a torsion drop kit and keeps the torsion bars out of view.
The kit lifts the vehicle enough for up to 35-inch tires. It includes lifted front knuckles and rear coil springs, a full set of high-clearance crossmembers, differential drop brackets and torsion bar drop brackets, which the brand says keep the components tucked and at optimum angles.
Front N3 shocks are custom valved to the vehicle and designed for balanced performance on and off road. Front CV spacers, sway-bar links and a protective skid plate are also included.
Key features
- Non-torsion drop design that hides the torsion bars from view
- Lifted front knuckles
- Rear coil springs
- High-clearance crossmembers
- Differential drop brackets and torsion bar drop brackets
- Front N3 shocks, front CV spacers, sway-bar links and skid plate
Torsion bars and drop kits
A drop kit lowers the torsion bar anchor points so the bars sit at a different angle, which changes the front ride height. Because the front suspension depends on the torsion bars, the front end should be checked for correct height and alignment after any drop. Worn ball joints and a sagging front end should be addressed before a drop kit is installed, since they can make the new geometry harder to set.
Front CV angles increase when a drop is added, so the driveline should be checked for vibration after installation. Keep the skid plate and sway-bar links in good condition, and inspect the front brake lines for clearance once the truck is back on the ground.
- Inspect ball joints before installing a drop
- Check front CV angles after installation
- Look for brake line clearance at full steering
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C28020 |
| Lift kit | 6 inches, stage 1 |
| Drop design | Non-torsion drop |
| Front shocks | N3 |
| Rear shocks | None listed |
| Rear lift method | Coil springs |
| Tire size | 35 inches |
| Lift height range | 6 to 7 inches |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 2002–2006 Cadillac Escalade Base, the 2000–2006 Chevrolet Tahoe in Base, LS, LT, Limited and Z71 versions, and the 2000–2006 GMC Yukon in Denali, SL, SLE and SLT versions. Suburban and other GM trucks are not covered, and model years before 2000 and after 2006 fall outside this fit.
Suburban and other GM trucks are not on the list. Model years before 2000 and after 2006 are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifted knuckles and drop brackets change the front geometry and the CV angles, so have the alignment checked after installation and confirm the front driveline angles.
What’s included
Lifted front knuckles, rear coil springs, high-clearance crossmembers, differential and torsion bar drop brackets, front N3 shocks, front CV spacers, sway-bar links and a protective skid plate.










