Overview
The Rough Country 2-inch leveling kit, part number R/C90300, levels a 2018–2020 Subaru Crosstrek from front to rear. It removes the nose-down look of the factory stance and gives the vehicle more ground clearance, which allows larger tires and wheels to be run.
The kit uses a set of front and rear strut spacers. The brand says they are laser cut for a precise fit and powder coated black to resist the elements. The spacers are designed to install without complicated strut disassembly.
Because the kit is a leveling kit rather than a full lift, the rear uses a block or spacer method, and the shock absorbers are not included.
Strut spacers sit between the strut mount and the vehicle body, so they raise the front without changing the spring or the damper inside the strut. Rear coil spacers raise the rear on the same principle, which is how the stance is matched front to rear.
Leveling means raising the front to match a rear that is already at height, rather than lifting both ends by a larger amount. That is the purpose the brand gives for this kit.
Key features
- Front and rear strut spacers for a level, more aggressive stance
- Laser cut for a precise fit
- Powder coated black to resist the elements
- Installs without complicated strut disassembly
- Allows larger tires by adding ground clearance
- Listed lift height range of 0 to 3.5 inches
Choosing a level setup
Strut spacers raise the front by sitting between the strut mount and the body, so the spring and damper keep their original design. That matters on a compact crossover, where ride quality depends on the strut doing its job at the new height. A leveling setup matches the front to the rear instead of lifting one end far beyond the other.
Before choosing tires, think about the whole picture. Extra clearance is only part of it, since wheel offset, fender liner condition and steering lock all decide whether a larger tire rubs. Many owners test a wheel with a slightly different offset and re-check clearance at full lock and over bumps.
Use the install as a chance to inspect the mounts and bushings. Look for cracked rubber, leaking struts and uneven tire wear after the change. Recheck fasteners after the first few drives, since new spacers can settle under load.
- Check tire rub at full steering lock
- Inspect strut mounts during installation
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C90300 |
| Kit type | Leveling kit, 2 inches, stage 1 |
| Rear lift method | Block or spacer |
| Rear lift component | Spacer |
| Lift height range | 0 to 3.5 inches |
| Finish | Powder coated black |
| Listed tire size | 235 |
| Shocks included | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2020 Subaru Crosstrek.
Other Subaru models and Crosstrek model years outside 2018–2020 are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strut spacers change the front ride height and alignment geometry. After installing, have the wheel alignment checked and the headlight aim adjusted.
What’s included
One set of front and rear strut spacers.
Not included: shock absorbers.
















