Overview
The Rough Country 3.5 Inch Suspension Lift Kit with Forged Upper Control Arms, part number 22630, lifts and levels the front of the 2019–2022 GMC Sierra 1500 with the rear. It fits the 2019–2021 Sierra 1500 in the AT4, Base, Denali, Elevation, SLE and SLT trims, and the 2022 Sierra 1500 Limited in the AT4, Denali, Elevation, Pro, SLE and SLT trims. It fits short bed models only.
The kit uses forged aluminum upper control arms for the front geometry, with rear blocks and U-bolts for the rear lift. It handles tires up to 295/55R20, and the lift sits between a simple level and a full 6 inch lift.
Key features
- Forged aluminum upper control arms
- N3 shocks included, 10-stage variable valving with nitrogen charge
- 18 mm spring-loaded piston rod and 54 mm shock body, rated to 36 kN tensile strength
- POM ball joints for greater articulation and maintenance-free use
- Fabricated rear blocks, stronger than cast blocks
- Lifetime replacement guarantee
Bed length and tire setup
Bed length matters with this type of lift because the rear blocks and U-bolts change how the axle sits under the cab and bed. Short bed trucks have a different rear geometry than long bed models, so check the bed size before buying and make sure the kit suits your truck. Tire size is the other factor, since larger tires increase the load on the control arms and steering.
After any lift, the front alignment should be checked, and forged upper control arms are no exception. Recheck the upper and lower bolts after the first few drives and look for cracks around the mounts. Watch for uneven tire wear, vibration at highway speed, or a pull under braking, since these can point to alignment or geometry issues that need attention.
- Confirm bed length before ordering
- Check tire clearance at full steering lock
- Recheck bolts after the first drives
- Watch for uneven tire wear
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 22630 |
| Lift | 3.5 inch stage 1 |
| Lift height range | 0 to 3.5 inches |
| Upper control arms | Forged aluminum |
| Rear lift | Block and U-bolt |
| Rear blocks | Fabricated |
| Shocks | N3, included |
| Shock rod | 18 mm spring-loaded piston rod |
| Shock body | 54 mm |
| Shock tensile strength | Up to 36 kN |
| Maximum tire size | 295/55R20 |
Vehicle fitment
It fits the 2019–2021 GMC Sierra 1500 in the AT4, Base, Denali, Elevation, SLE and SLT trims, and the 2022 GMC Sierra 1500 Limited in the AT4, Denali, Elevation, Pro, SLE and SLT trims.
It does not fit Chevrolet 1500 models, Chevrolet Trail Boss models, 2019 Classic models with the 2018 body style, or trucks with Adaptive Ride Control. Confirm fit for your vehicle’s year, model, trim and ride control setup before ordering.
Installation notes
The kit includes fabricated rear blocks and POM ball joints, which Rough Country says are installed as part of the kit. Because the front uses forged upper control arms, have the alignment checked after installation.
What’s included
Forged upper control arms, N3 shocks, POM ball joints, fabricated rear blocks, and rear U-bolts.
















