Overview
The RockJock 4×4 CE-9112N75SPL is a narrow style forged Johnny Joint rod end, part number R/JCE-9112N75SPL. It provides 40 degrees of overall articulation travel, a range RockJock describes as exclusive to its own joints. Its fitment is shown as universal.
Key features
- Narrow style forged body
- 40 degrees of overall articulation travel
- Range RockJock describes as exclusive to its joints
Checking the joint before fitting
A Johnny joint sits where a link meets a bracket or arm and lets the connection pivot as the axle cycles over uneven ground. Its job is to take the swing and the load while keeping the link straight, so the ball and housing see most of the wear. Before fitting a narrow forged joint, look at the spacing between the mounting points and make sure the joint sits square to the link without binding at full travel.
Once installed, check the joint regularly for play by lifting the link and feeling for movement at the ball. Grease the fitting if the joint has one, and replace the joint when the ball shows scoring or the housing starts to show slop. Lock the jam nut once the thread length is set, and recheck it after the first few trail runs.
- Measure the mounting bore and stud before ordering
- Keep thread engagement consistent on both ends
- Replace worn joints in pairs when they are part of a matched set
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9112N75SPL |
| Style | Narrow, forged |
| Articulation | 40 degrees overall travel |
Vehicle fitment
Shown as universal fit, so no single vehicle applies. Compare the joint dimensions with your own build.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Nothing beyond the joint itself is named.









