Overview
The RockJock 4×4 CE-9114-21 is a forged Johnny Joint rod end, part number R/JCE-9114-21, for builders who want a high-angle joint in a custom suspension. The joint runs quietly, with no road noise or clunk.
Key features
- Forged Johnny Joint construction
- High-angle joint for custom suspension
- Quiet operation with no road noise or clunk.
- 100% rebuildable
- Field serviceable
Before you install a rod end
Before installing any rod end, dry-fit it to confirm the joint sits square and the thread engages fully in the sleeve. Partial thread engagement is a common cause of joints pulling loose under load. Check that the joint clears the frame, axle and tires at full travel, since a high-angle joint can reach positions a standard joint cannot.
Once it is fitted, check the joint for smooth movement by hand and look for any binding through the arc. Jam nuts should seat firmly without distorting the threads. Grease the joint after installation and again after water, mud or dust exposure. Schedule periodic checks for play, boot or seal damage, and wear on the ball, since the first few trail runs often reveal fastener settling.
- Dry-fit before final tightening
- Confirm full thread engagement
- Check clearance at full travel
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9114-21 |
| Joint type | Forged Johnny Joint rod end |
| Rebuildability | 100% |
| Serviceability | Field serviceable |
Vehicle fitment
The fitment is universal, so this joint is not tied to a particular truck or model. Confirm that the joint size and thread match your existing suspension parts before installing it.
What’s included
One forged Johnny Joint rod end.
Not included: no jam nuts, bolts or washers are named.









