Overview
The RockJock 4×4 CE-9116N-13 is a narrow forged Johnny Joint rod end, part number R/JCE-9116N-13. Its 40 degrees of overall articulation travel is presented by RockJock as an exclusive feature. The fitment entry is universal, so the joint is not tied to one vehicle.
Key features
- Narrow style forged construction
- 40 degrees of overall articulation travel
Joint size and articulation
A Johnny Joint is a rod end that lets a link move through an arc while staying fixed in length. Articulation travel matters because it decides how far a suspension or steering link can swing before the joint runs out of range. A narrow body helps where space is tight, but it leaves less room for the bearing, so check the joint’s size against the link and the mounting points before fitting.
Once installed, check the joint for play by hand and look for torn boots or dry bearings. Keep a light coat of grease on the fitting if it has a grease port, and recheck jam nut tightness after the first few drives. Replace a joint with a loose or rough feel, since wear shows up as clunks or wandering on the trail.
- Measure the link before ordering
- Check for play after installation
- Re-torque jam nuts after the first drives
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9116N-13 |
| Style | Narrow, forged |
| Articulation | 40 degrees overall travel |
Vehicle fitment
Universal fit, with no vehicle matched to this part number. Review the joint’s size against the parts it will connect.
Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Only the joint itself is described.









