Select your vehicle

RockJock Johnny Joint Rod End – CE-9110CP

RockJock 4x4

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • RockJock 4×4 Johnny Joint rod end, part number R/JCE-9110CP
  • Offers 30 degrees of unrestricted movement in any direction, versus 22 degrees on a common heim joint
  • High density polyurethane bushing encases a spherical ball
  • Zerk fitting for greasing; universal fit

Description

Overview

The RockJock 4×4 CE-9110CP is a Johnny Joint rod end for off-road steering and suspension linkages that need more articulation than a common heim joint provides. It offers 30 degrees of unrestricted movement in any direction, compared with 22 degrees on a common heim joint. It is universal fit, not tied to one vehicle.

Each joint uses a high density polyurethane bushing that encases a spherical ball, with a zerk fitting for lubrication.

Key features

  • 30 degrees of unrestricted movement in any direction
  • High density polyurethane bushing encasing a spherical ball
  • Zerk fitting for easy lubrication

Articulation and greasing

Articulation is the reason to choose a Johnny Joint over a standard heim joint. Where a heim joint runs out of range, a polyurethane-bushed ball keeps the linkage moving through a wider arc, which helps on articulating trails. Plan the joint’s position so it works within that arc at both extremes of suspension travel.

The polyurethane bushing is the wear point. It holds the ball in place and absorbs some vibration, but it can take in grit and soften with heat. Inspect the bushing for cracks, flattening or gaps around the ball, and replace the joint when the bushing can no longer hold the ball steadily.

Greasing through the zerk keeps the ball moving smoothly. Grease after washing the vehicle or after water crossings. Keep the zerk clean and check the joint after the first few trail runs, since new linkage often settles and needs a check for play.

  • Set the joint’s position for full suspension travel
  • Inspect the bushing for cracks or gaps
  • Grease after water crossings
  • Recheck play after the first few trail runs

Specifications

Brand RockJock 4×4
Part number R/JCE-9110CP
Articulation 30 degrees unrestricted, any direction
Bushing High density polyurethane
Lubrication Zerk fitting

Vehicle fitment

This Johnny Joint is universal fit and is not tied to a specific year, make or model. Check the rod end’s size and mounting against your own linkage.

Before ordering, check the joint against your vehicle’s year, model and trim, and measure it against the linkage it will replace.

What’s included

Check the package contents against your installation before starting.

Questions & Answers

What is a Johnny Joint rod end?

A Johnny Joint is a rod end with a polyurethane-bushed spherical ball that allows more articulation than a common heim joint. The RockJock 4x4 CE-9110CP offers 30 degrees of unrestricted movement in any direction, against 22 degrees on a common heim joint.

Does the CE-9110CP fit my Jeep?

It is universal fit, so no single year, make or model applies. Confirm fit for your vehicle's year, model and trim, and check the joint's size and mounting against your linkage before ordering.

Does it come with a grease fitting?

Yes. The joint has a zerk fitting for easy lubrication once it is installed, and grease can be added through it after assembly. Check the package contents against your installation before starting.

Can a Johnny Joint be used in place of a heim joint?

It can be used where a linkage needs more articulation than a standard heim joint offers, but it is not a direct swap for every application. Check the joint's size, mounting and thread against the linkage before fitting it, and keep the bushing in good condition.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon