Select your vehicle
-13%

RockJock Johnny Joint Rod End – CE-9112P-12

RockJock 4x4

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • RockJock 4×4 Johnny Joint rod end, part number R/JCE-9112P-12
  • 30 degrees of unrestricted movement in any direction
  • Polyurethane bushing around a spherical ball, with zerk lubrication
  • Zerk fitting for greasing, universal fit

Description

Overview

The RockJock 4×4 CE-9112P-12 is a Johnny Joint rod end for steering and suspension linkages on off-road builds. A polyurethane bushing surrounds the spherical ball, giving 30 degrees of unrestricted movement in any direction, where a common heim joint gives 22 degrees. It is universal fit rather than built for one vehicle.

Key features

  • 30 degrees of unrestricted movement in any direction
  • Polyurethane bushing around a spherical ball
  • Zerk fitting for greasing

Choosing and fitting a rod end

A rod end sits where a link meets a bracket or knuckle, so it takes load from both directions. Before fitting a Johnny Joint, check the thread, ball size and mounting against the link it replaces. A small mismatch can leave the joint binding at full travel even when it looks right on the bench.

Polyurethane-bushed joints behave differently from metal-only ends. The bushing adds some damping but can soften in heat and collect grit. Inspect it when the joint is greased, looking for cracks, a gap around the ball or a bushing that has shifted in its housing.

Where possible, run the linkage through full travel with the joint installed before final tightening. Look for binding, rubbing against nearby parts and any contact with the frame. Lock the jam nut and recheck it after the first few trips.

  • Match thread and ball size before purchase
  • Inspect the bushing during greasing
  • Test full travel before final tightening
  • Recheck the jam nut after the first trips

Specifications

Brand RockJock 4×4
Part number R/JCE-9112P-12
Articulation 30 degrees unrestricted, any direction
Bushing High density polyurethane
Lubrication Zerk fitting

Vehicle fitment

The joint is universal fit, so size and mounting, not a model name, decide whether it suits your linkage.

Before ordering, check the joint against your vehicle’s year, model and trim, then measure its size and mounting.

What’s included

Verify what comes in the box against your installation plan before starting work.

Questions & Answers

What is the part number for the RockJock 4x4 Johnny Joint 9112P-12?

The part number is R/JCE-9112P-12 from RockJock 4x4. It is a Johnny Joint rod end with a polyurethane bushing around a spherical ball and 30 degrees of unrestricted movement in any direction.

Will this rod end fit a specific vehicle?

It is universal fit, so no year, make or model applies. Measure the joint's size, thread and mounting against your linkage before you buy it.

How much movement does it give compared with a heim joint?

The joint gives 30 degrees of unrestricted movement in any direction, while a common heim joint gives 22 degrees. That suits linkages that need extra articulation.

How often should I grease a polyurethane-bushed rod end?

Grease it after washing the vehicle, after water crossings and whenever the joint feels dry or stiff. Wipe the zerk clean before each session. Frequent greasing helps the ball move freely and gives early warning of wear, since dry joints wear faster than lubricated ones.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon