Overview
The RockJock 4×4 Narrow Johnny Joint Rebuild Kit, part number R/JCE-9110NRK, rebuilds narrow Johnny joints used on some solid-axle front ends. It falls in the fabrication and tools category and is Universal Fit.
Synergy Manufacturing designed the kit using CAD engineering software, with more than 10 years of suspension design experience on the design team. Fit is universal, so match the kit to your vehicle by part number and joint size.
Key features
- Rebuild kit for the narrow Johnny joint
- Designed with CAD engineering software
- Design team cites more than 10 years of suspension design experience
- Brand RockJock 4×4, part number R/JCE-9110NRK
Rebuild work on steering joints
Rebuilding a steering joint makes sense when the housing is sound but the internal wear has started to loosen the ball. Before you start, clean the housing thoroughly and check the bore for scoring. If the housing is cracked or elongated, replacing the whole joint is the safer choice, since no rebuild restores a damaged casting.
Pay attention to the order of reassembly and keep every component in its position. Grease the new parts before closing the housing, and make sure the seal or boot sits fully in place. After reinstalling, cycle the joint through its full movement by hand and check for binding before driving.
- Inspect the housing bore for scoring
- Replace seals and boots with the kit parts
- Recheck the steering geometry after a rebuild
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9110NRK |
| Type | Narrow Johnny Joint rebuild kit |
Vehicle fitment
Fit is universal and not matched to a particular Jeep or truck, with no years, models or chassis codes tied to this kit.
Compare the joint and steering setup your axle needs before ordering. Confirm your year, model and trim first.
What’s included
Confirm the rebuild parts against your installation before starting work.









