Overview
The RockJock 4×4 CE-9110-12 is a Johnny Joint rod end, part number R/JCE-9110-12. It offers 30 degrees of unrestricted movement in any direction, compared with 22 degrees on a common heim joint.
The joint uses a high density polyurethane bushing that encases a spherical ball. A zerk fitting is included for lubrication, so the bushing and ball can be greased.
Key features
- 30 degrees of unrestricted movement in any direction.
- High density polyurethane bushing
- Spherical ball encased in the bushing
- Zerk fitting for lubrication
Polyurethane bushings in the field
A polyurethane bushing sits between the spherical ball and the housing, which changes how the joint wears compared with a bare metal bearing. Grit that gets past the seal tends to work into the bushing and ball, so greasing through the zerk helps flush it out. Keep an eye on the bushing for cracks, flattening or tearing, since those are early signs of wear.
When sizing a joint, match the thread and the mounting to the links you are replacing, and check that the joint clears the surrounding parts at full articulation. Articulation figures are useful for planning, but test clearance on your own vehicle before relying on them. Replace the joint when play increases under load, and keep spare grease on hand for trail trips.
- Grease after mud, water or dust exposure
- Inspect the bushing for cracks or tearing
- Test clearance at full articulation
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9110-12 |
| Joint type | Johnny Joint rod end |
| Articulation | 30 degrees unrestricted movement (RockJock figure) |
| Comparison | 22 degrees on a common heim joint |
| Bushing | High density polyurethane |
| Lubrication | Zerk fitting |
Vehicle fitment
It is a universal fit, so it is not tied to a particular vehicle. Choose the size and thread that match your links before ordering.
No vehicle years or chassis codes are named for this joint.
What’s included
One Johnny Joint rod end with a zerk fitting.









