Select your vehicle

RockJock 9/16″ Greasable Bolt with Hardware – CE-91107TB

RockJock 4x4

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • RockJock 4×4 9/16 inch greasable bolt, part number R/JCE-91107TB
  • 9/16 inch fine thread, 4 1/2 inch long
  • Grade 8 zerk fitted bolt
  • Includes two flat washers and a stover nut

Description

Overview

The RockJock 4×4 CE-91107TB is a 9/16 inch greasable bolt, part number R/JCE-91107TB, measuring 4 1/2 inches long. It is a grade 8 zerk fitted bolt with 9/16 inch fine thread, and it comes with two flat washers and a stover nut.

This bolt greases RockJock Johnny Joint rod ends and can serve in other applications that need a greasable grade 8 fastener of this thread and length.

Key features

  • Grade 8 bolt
  • 9/16 inch fine thread
  • 4 1/2 inch length
  • Zerk fitted for greasing
  • Two flat washers and a stover nut included

Choosing and installing a greasable bolt

A greasable bolt works as a pivot pin with a grease path built in. The zerk lets you push fresh grease into the bearing surface without taking the joint apart, which helps keep dirt and water out of working surfaces on the trail. Regular greasing matters most after water crossings, mud runs and long highway stretches where grit can work into the joint.

When buying a replacement, match the thread pitch first, since fine and coarse threads will not mate. Confirm the grip length so the bolt clamps the joint without bottoming out or leaving threads exposed. Seat the washers evenly and keep the hole clean. Inspect threads and the zerk regularly for wear, bending or galling, and replace a bolt that has stretched. Keep a spare zerk on hand, since fittings are often knocked off on rocks.

  • Match thread pitch before ordering
  • Check washer and nut placement at install
  • Re-grease after mud or water exposure

Specifications

Brand RockJock 4×4
Part number R/JCE-91107TB
Thread 9/16 inch fine
Length 4 1/2 inch
Bolt grade Grade 8
Lubrication Zerk fitting
Hardware included 2 flat washers, 1 stover nut

Vehicle fitment

It is a universal fit and is not built for one vehicle. Confirm that the 9/16 inch thread and 4 1/2 inch length suit your joint and mounting before installing.

Installation notes

The two flat washers and the stover nut come with the bolt. The zerk is fitted to the bolt, so grease the joint through it once installed.

What’s included

One grade 8 zerk fitted bolt, two flat washers and one stover nut.

Questions & Answers

What is the RockJock 4x4 CE-91107TB?

It is a 9/16 inch greasable bolt with hardware, part number R/JCE-91107TB. The bolt has 9/16 inch fine thread and is 4 1/2 inches long, and it is a grade 8 zerk fitted bolt.

How long is this bolt?

The bolt is 4 1/2 inches long, with 9/16 inch fine thread. Check that length against the thickness of your joint and mounting before installing.

Does it fit a specific vehicle?

No specific vehicle is required for this bolt. It is a universal fit and is used to grease Johnny Joint rod ends in a range of applications. Confirm thread and length against your joint before ordering.

What comes in the package?

The package includes a grade 8 zerk fitted bolt, two flat washers and a stover nut. No other components are listed, so anything beyond those hardware pieces is not included.

Should I replace the washers or stover nut when reinstalling?

Replace them if they show wear, deformation or damaged threads. A stover nut relies on a nylon insert to resist loosening, and that insert loses grip after repeated use. Reusing a worn nut can let the joint back off over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon