Overview
The RockJock 4×4 CE-9114-20 is a forged Johnny Joint, part number R/JCE-9114-20, suited to custom suspension work where a high-angle joint is needed. The joint runs quietly, without passing road noise or clunk through to the vehicle.
Key features
- Forged construction for custom suspension work
- High-angle joint design
- No road noise or clunk transmitted.
- 100% rebuildable
- Field serviceable
Setting up a high-angle joint
A high-angle joint lets a link travel through a wider arc than a standard joint, which matters when suspension articulates hard or geometry is changed. Keep the joint’s angle in mind when setting lengths, so it does not run out of travel at full compression or droop. Check clearances at both extremes before final tightening.
Grease and boots help the joint last, especially in mud, sand and water. Inspect the seal area after each trail day and wipe away grit before greasing. Once the joint is in service, recheck the jam nuts and mounting hardware after the first few trail runs, since new joints settle as the fasteners seat.
- Check travel at full compression and droop
- Recheck jam nuts after first trail runs
- Grease after water or mud exposure
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9114-20 |
| Joint type | Forged Johnny Joint |
| Rebuildability | 100% |
| Serviceability | Field serviceable |
Vehicle fitment
It is a universal fit, so no particular vehicle is required. Measure your existing joint’s size, thread and mounting against the replacement before installing it.
What’s included
One forged Johnny Joint rod end.
Not included: No bolts, washers or jam nuts come with the joint.









