Overview
The RockJock 4×4 CE-9113L-26 is a forged Johnny Joint, part number R/JCE-9113L-26, made for custom suspension builds that call for a high-angle joint. The joint is designed not to transmit road noise and clunk.
Key features
- Forged Johnny Joint design
- High-angle joint for custom suspension builds
- Does not transmit road noise and clunk.
- 100% rebuildable
- Field serviceable
Maintaining a high-angle joint
High-angle joints are often run near the edge of their movement, so the ball and housing see more load than a joint working in a mild range. Set the linkage so the joint is not forced past its travel, and check that the ball has room to move freely before the vehicle goes onto rough terrain.
A rebuildable joint pays off when it is inspected regularly. Remove any seal, look for grit inside the housing and check the ball surface for pitting or scoring. Clean out old grease fully before packing new grease, since mixed or contaminated grease reduces protection for the bearing surfaces.
Build a simple habit around the joint. After each outing, grease it, look for play and check the fasteners that hold it to the linkage. A joint that feels loose or clicks under load is a sign to rebuild it before it damages the surrounding components. Keep a few common rebuild parts with your trail gear so repairs can happen on the spot.
- Set the linkage so the joint stays within travel
- Clean old grease fully before repacking
- Check the ball surface for pitting
- Inspect fasteners after every outing
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9113L-26 |
| Joint type | Forged Johnny Joint |
| Construction | Forged |
| Rebuildability | 100% |
| Serviceability | Field serviceable |
Vehicle fitment
This joint is universal fit and is not tied to one vehicle model. Compare its thread, ball size and bolt hole with your existing suspension parts before installing it.
What’s included
One forged Johnny Joint.
Not included: no hardware, bolts or jam nuts are listed with this joint.









