Overview
The TeraFlex 744500 is a non-adjustable rear sway bar link for 2007–2017 Jeep Wrangler JK models with a 2.5 inch lift. It is built for 2 and 4 door Wranglers and fits JK trims including Rubicon, Sahara, Sport and Unlimited versions.
TeraFlex designed the link to reduce clearance issues between the tire and the rear sway bar. The upper link uses a sealed narrow shoulder tie rod style ball socket for maximum tire clearance, and the lower link uses a sealed ball socket for immediate reaction during sway bar loading.
Key features
- Upper link with sealed narrow shoulder tie rod style ball socket
- Lower link with sealed ball socket
- Built within OEM quality standards for long term durability
- Designed for maximum tire clearance at the rear
- Non-adjustable design
- Built for 2.5 inch lifts on JK Wranglers
Choosing a rear sway bar link
A sway bar link carries roll forces between the sway bar and the axle, so its ball joints and bushings work every time the suspension moves. On a lifted JK, the angle of the link changes more under articulation, which puts extra load on both ends. Inspect the ball sockets and boots regularly, looking for torn seals, grease loss, rust around the socket or any play when the axle is lifted.
When choosing a replacement, confirm the link matches the sway bar setup on your vehicle and the lift height, since the two must work together. Links are often replaced in matched pairs so both sides wear and handle alike. Keep the mounting hardware clean and torque it to the specified value during install, then recheck after the first few drives. Pay attention to clearance at the tire and frame when the suspension is at full travel.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 744500 |
| UPC | 843885018162 |
| Position | Rear |
| Type | Non-adjustable |
| Lift | 2.5 inch |
| Upper link end | Sealed narrow shoulder tie rod style ball socket |
| Lower link end | Sealed ball socket |
| Compatibility | Not compatible with the rear S/T trail sway bar system |
| Fitment type | Direct fit |
Vehicle fitment
The TeraFlex 744500 fits 2007–2017 Jeep Wrangler (JK) models, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, X and the Unlimited versions of those trims.
The fit covers 2007–2017 JK models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The link is designed for a 2.5 inch lift and will not work with the rear S/T trail sway bar system. Identify which rear sway bar your Wrangler has before fitting this link.
What’s included
One rear sway bar link, listed individually.
Not included: a second link for the opposite side, if your application needs one.







