Overview
The TeraFlex 600491 is a driver side front sway bar link for Jeep Wrangler TJ vehicles with 2 to 6 inch of lift. It also fits 1997–2001 Jeep Cherokee (XJ) and 2004–2006 Jeep Wrangler Unlimited (LJ) models.
The upper end uses a large polyurethane ball, and the lower end slides over a stainless steel pin for easier link removal. The design reduces play under sway bar loading and improves lateral control and steering response compared with stock rubber bushings.
Key features
- Large polyurethane ball for long term durability and quiet operation
- Lower end slides over a stainless steel pin
- Eliminates excess play when connected for street use
- Improved lateral control and steering response compared with stock rubber bushings
- U-bracket stud for the upper connection
- Designed for 2 to 6 inch of lift
Driver side links and lift height
A sway bar end link on a TJ carries the load between the bar and the axle or control arm, so its job changes as the suspension moves. A polyurethane ball and a stainless steel pin can reduce play at the joint, while a U-bracket stud gives a solid upper connection. Because this link is for the driver side, the matching passenger side link should be checked at the same time.
With 2 to 6 inch of lift, the link angle changes and the joints work through a different range, so measure the lift and confirm the link fits before tightening. Raise and support the vehicle safely while working on the suspension. Inspect the pin, ball, and stud regularly, and replace any part that is bent, cracked, or loose. Regular checks help the bar keep its intended control.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 600491 |
| UPC | 843885017578 |
| Position | Front, driver side |
| Ball type | Polyurethane |
| Pin type | Stainless steel |
| Stud type | U-bracket stud |
| Lift range | 2 to 6 inch |
| Fitment type | Direct fit |
Vehicle fitment
The fit covers 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
It is a driver side fit for the TJ Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering, especially for Wrangler JK and later models.
Installation notes
Confirm you need the driver side link before fitting. Raise and support the vehicle on stands before working on the front suspension.
What’s included
One driver side front sway bar link with U-bracket stud.
Not included: a passenger side link, since this part is for the driver side.









