Overview
The TeraFlex 7.5 inch adjustable center link, part number TER1700015, is a front sway bar center link for Jeep Wrangler models with a 4 to 6 inch lift. It fits the 1997–2006 Wrangler (TJ), the 2004–2006 Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 2007–2018 Wrangler (JK).
The link is threaded on both ends so it can be adjusted to fit each application. It includes right-hand and left-hand threaded rod ends, and TeraFlex designed it for its ST (Street and Trail) front sway bars. The zinc plating resists rust and corrosion, and the kit includes two jam nuts for locking the adjustment.
Key features
- Adjustable length, threaded on both ends
- Right-hand and left-hand threaded rod ends
- Zinc plating for rust and corrosion resistance
- Designed for TeraFlex ST front sway bars
- Two jam nuts for locking the adjustment
Sway bar links and alignment
A front sway bar center link connects the two halves of the bar and transfers motion from one side of the axle to the other. On a lifted Wrangler, the link length changes the geometry of the bar and its angle at each end, so the bar can bind or sit at an odd height if the link is set too short or too long. Setting the length carefully keeps the bar working as designed through the normal range of travel.
Because the link is threaded at both ends, check the threads for full engagement before tightening the jam nuts. Look for bent or damaged rod ends, torn boots, and bushings that have cracked or worn loose, since these can cause clunking over bumps. Joint wear is often found during a lift or alignment, so inspect the rod ends and bushings at the same time as the link.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1700015 |
| Product type | Front sway bar center link |
| Length | 7.5 in., adjustable |
| Lift height | 4-6 in. |
| Thread | Right-hand and left-hand rod ends |
| Finish | Zinc plated |
| Jam nuts | 2 |
| Fitment | Direct fit |
Vehicle fitment
The link fits the 2007–2018 Jeep Wrangler (JK) in two-door and four-door 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions. It also fits the 2004–2006 Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Wrangler (TJ) in its 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions. It is sized for a 4 to 6 inch lift.
The list does not include the YJ Wrangler or the 2018 and newer JL models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjust the link to the length your sway bar and lift need, then lock it with the jam nuts. Check the front alignment after the lift and the link length are set.
What’s included
One adjustable front sway bar center link with right-hand and left-hand threaded rod ends, two jam nuts, and all necessary hardware.









