Select your vehicle

Antirock Sway Bar End Link Rod (10 1/2″)

Currie

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 10 1/2″ long Antirock sway bar end link threaded rod
  • 1/2″-20 right-hand thread on one end, left-hand on the other
  • Used in CE-9900JKR and CE-9900JKR4 rear Antirock kits
  • Fits the 2007–2017 Jeep Wrangler (JK)

Description

Overview

The Currie CE-9901RD5 is a 10 1/2-inch long Antirock sway bar end link threaded rod, sold as a rod only. It is used in the CE-9900JKR and CE-9900JKR4 rear Antirock kits for 2 and 4 door Jeep Wrangler (JK) models, and it fits the 2007–2017 Jeep Wrangler (JK).

The rod is threaded 1/2″-20 right-hand on one end and 1/2″-20 left-hand on the other, so the matching joints and jam nuts must suit each end.

Key features

  • 10 1/2″ long threaded rod
  • 1/2″-20 right-hand thread on one end and 1/2″-20 left-hand on the other
  • Used in CE-9900JKR and CE-9900JKR4 rear Antirock kits
  • Sold as a rod only

Choosing matching end link parts

A sway bar end link connects the sway bar to the axle or suspension and carries load every time the vehicle leans through a turn or crosses uneven ground. When one end wears, the link can knock, feel loose on the road, or let the sway bar move more than it should. A threaded rod like this one is only one part of the assembly, so the joints on each end determine how the whole link performs.

Because the threads run in opposite directions, the joints and jam nuts must be matched to the correct side before tightening. Mixing up the right-hand and left-hand ends is an easy mistake during rebuilds, so mark the orientation of each end before removing the old rod. Inspect the heim joints for play, check the rod for bent or damaged threads, and tighten the jam nuts once the adjustment is set.

  • Check heim joints for play or binding
  • Look for bent or stripped threads on the rod
  • Confirm jam nuts seat fully against each joint

Specifications

Brand Currie
Part number CE-9901RD5
UPC 70000417635
Length 10 1/2 inch
Thread 1/2″-20 RH on one end, 1/2″-20 LH on the other
Application Rear Antirock kits CE-9900JKR and CE-9900JKR4
Fitment type Direct fit
Included Threaded rod only

Vehicle fitment

The manufacturer fitment list covers the 2007–2017 Jeep Wrangler (JK), including the Rubicon, Sahara, Sport and Sport S trims, the 70th and 75th Anniversary editions, the X trim, and the Unlimited versions of those trims.

Other Wrangler generations, including the TJ, LJ and JL, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Match the joints to the thread on each end, because the rod is right-hand on one side and left-hand on the other. The 1/2″-20 female heim joints and jam nuts are used with the rod and are available separately.

What’s included

The threaded rod only.

Not included: the RH and LH 1/2″-20 female heim joints and 1/2″-20 jam nuts, which are available separately.

SKU: CURCE-9901RD5 Category:

Specification

Shipping weight 10.00 lbs
Package dimensions 12.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201770th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the Antirock CE-9901RD5 a complete sway bar end link?

No. It is a 10 1/2" threaded rod only. The matching RH and LH 1/2"-20 female heim joints and 1/2"-20 jam nuts are available separately, so you may need them to build the end link.

Which Jeeps does the rod fit?

It fits the 2007–2017 Jeep Wrangler (JK), including Rubicon, Sahara, Sport and Sport S trims, the 70th and 75th Anniversary editions, and Unlimited versions. Check your trim before fitting.

What thread size does the rod use?

The rod is 1/2"-20 threaded at both ends. One end is right-hand (RH) and the other is left-hand (LH), so the heim joints must match each end. The rod is 10 1/2" long overall.

How can you tell a sway bar end link needs replacing?

Common signs include knocking over bumps, a looser feel in turns, and visible play in the joints at either end. Inspect the ends for cracked boots, bent threads, and loose jam nuts during routine service, and replace any worn joint before it fails.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon