Overview
The Pro Comp 6-inch Lift Kit with PRO-M Shocks, part number EXPK1175M (kit K1175M), is a stage 1 suspension lift for the 2019 to 2021 Chevrolet Silverado 1500 and the 2019 to 2022 GMC Sierra 1500, plus the 2022 Sierra 1500 Limited.
The 2019 GM 1500 trucks use a new chassis design, and this 6-inch kit is built for 20-inch or larger wheels with room for 35-inch all-terrain tires. Extended steering knuckles keep the factory steering geometry, and upper strut spacers keep the factory-tuned struts for a ride close to stock.
The kit uses front lower crossmembers and a differential skid plate made from 3/16-inch steel, which Pro Comp describes as adding chassis strength and protecting the front differential. The rear uses block or spacer lift components, with a block and U-bolt setup. PRO-M shocks are listed at the front and the rear, and they are included with the kit.
Key features
- 6-inch stage 1 suspension lift
- Extended steering knuckles that keep factory steering geometry
- 3/16-inch steel front lower crossmembers and differential skid plate
- Upper strut spacers that keep the factory-tuned struts
- PRO-M shocks at the front and rear, included
Checking the factory suspension first
Before buying a lift for a new-generation full-size pickup, confirm the factory suspension package. Some trims ship with a factory lift or electronic ride control, and those can change how a kit fits and rides. Dealer records or the build sheet can answer this quickly and save a return trip.
Larger tires are the main reason to think about clearance. Full steering lock, suspension compression and wheel offset all affect whether a tire rubs. Extended steering knuckles and strut spacers help keep geometry and ride closer to stock, but the steering system, brake lines and driveline should still be checked after installation.
Long-term care includes torque checks on new hardware, shock inspections and periodic alignment. Heavier tires add load to wheel bearings and ball joints, so listen for noise and check for play as the truck ages.
- Confirm the factory suspension package before ordering
- Check tire clearance at full steering lock
- Inspect brake lines and flex hoses after installation
- Recheck alignment after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK1175M |
| Kit code | K1175M |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches stage 1; range 6 to 7 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Front shocks | PRO-M |
| Rear shocks | PRO-M |
| Fit type | Direct fit |
Vehicle fitment
It fits 2019 to 2021 Chevrolet Silverado 1500 in the Custom, LT, LTZ, RST, SSV and WT versions, 2019 to 2022 GMC Sierra 1500 in the AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE and SLT versions, and the 2022 GMC Sierra 1500 Limited.
Model years 2018 and earlier and 2023 and newer are outside its fitment. It is not for Chevrolet Custom and LT Trail Boss models with a 2-inch factory suspension lift, GMC Denali trucks with Adaptive Ride Control, or GMC AT4 trucks with a 2-inch factory lift. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Several factory-equipped trims are excluded, so confirm the factory suspension package before starting the install, since the excluded trucks are specific.
What’s included
The 6-inch stage 1 lift kit with PRO-M front and rear shocks, the extended steering knuckles, the front crossmembers and differential skid plate, and the upper strut spacers.


























