Overview
The ReadyLift 69-3015 is an SST lift kit for 2007 to 2020 GM SUVs and 1500 trucks, sold under the 2.25-inch name. It raises the front 2.5 inches and the rear 1.5 inches for a mild stance with a slight rake for hauling or towing. Tires up to 33 inches are allowed, and the kit works on 2WD and 4WD models.
The front lift uses the GM front spacer. The rear 1.5 inches comes from a CNC-machined 6061-T6 billet aluminum rear coil spring spacer. The two parts work together to keep ride quality and factory geometry intact, and each kit includes hardware and detailed installation instructions.
Key features
- 2.5 inches of front lift from the GM front spacer
- 1.5 inches of rear lift from a billet aluminum coil spring spacer
- CNC-machined 6061-T6 billet aluminum construction at the rear
- Tires up to 33 inches
- 2WD and 4WD applications
- Hardware and detailed instructions included.
Rear air suspension and load
Rear air suspension and a rear spacer kit do not work together the same way as a coil setup. Air springs control height through pressure, while a spacer raises the coil or the mounting point, so the two systems can conflict. Owners with air bags should confirm the exact vehicle configuration before buying, and any air system should be checked for proper height after installation.
A 2.5-inch front and 1.5-inch rear split leaves the truck with a different rake than a level lift. That difference affects headlight aim, the feel of the load and the handling of a heavy trailer. Keep the factory suspension in good condition, since worn springs and shocks can make the new height look uneven.
- Check headlight aim after the lift
- Confirm trailer hitch height
- Look for uneven ride height from side to side
- Inspect the shocks before the first long trip
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-3015 |
| Front lift | 2.5 inches |
| Rear lift | 1.5 inches |
| Rear spacer material | CNC-machined 6061-T6 billet aluminum |
| Maximum tire size | 33 inches |
| Rear airbag suspension | Not compatible |
| Shocks | None included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the Cadillac Escalade, Escalade ESV and Escalade EXT, the Chevrolet Avalanche, Suburban and Tahoe, and the GMC Yukon, Yukon XL and Yukon XL 1500, across the model years and versions covered above.
The name reads 2.25 inches, while the lift figures are 2.5 inches at the front and 1.5 inches at the rear. The kit does not work with rear airbag suspension. Compare your vehicle’s model years and trim with this kit before ordering.
Installation notes
The front and rear lift change the suspension height, so an alignment check belongs after installation. ReadyLift says each kit includes instructions that detail the installation steps.
What’s included
The kit includes the GM front spacer, the billet aluminum rear coil spring spacer, and the hardware and detailed installation instructions.
Not included: Shocks are not included with this kit.









