Overview
The ReadyLift 66-2055 is a 2-inch front leveling kit for the 2010–2014 Ford F-150 SVT Raptor. It mounts on top of the strut, so the factory coil springs are not compressed during installation. The kit is steel, in a black finish, and provides front lift only.
The Raptor’s factory suspension uses a two-piece upper strut mount shim assembly to account for its wider track width. The kit is designed to keep that shim and support system in use, so the factory mounts continue to carry the load. It adds ground and tire clearance without reducing the structural support or strength of the factory suspension. The product includes no bump stops and no track bar drop, so the track bar stays at its factory height. Installation mounts the strut spacers on top of the strut, which avoids compressing the springs.
Key features
- 2 inches of front lift
- Works with the factory SVT Raptor suspension
- Keeps the factory two-piece upper strut mount shim assembly
- Steel strut spacers in a black finish
- Front lift only, with no bump stops
Factory shims and alignment
The two-piece shim assembly on the Raptor sets the position of the upper strut mount and helps the support system carry load. Keeping it in place during a leveling install preserves the original geometry as closely as possible. Because the front height changes, the alignment still needs to be set after installation, and the tire wear pattern should be watched over the next few months.
Off-road use places extra stress on the front strut mounts and the surrounding hardware. Look for cracking, loose bolts or movement at the mount during regular service. Spacer fasteners should be rechecked after rough trail use, since vibration can loosen them over time.
- Keep the shim assembly in place during installation
- Recheck spacer fasteners after rough trail use
- Watch tire wear after the alignment
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2055 |
| Type | Front leveling kit with strut spacers |
| Front lift | 2 inches |
| Rear lift | Front lift only |
| Spacer material | Steel |
| Finish | Black |
| Bump stops | None |
| Track bar drop | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2010–2014 Ford F-150 SVT Raptor.
It fits the SVT Raptor only. Standard F-150 models and the 2009 and 2015 Raptors are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacers change the front height and suspension geometry, so have the alignment checked after installation.
What’s included
Steel strut spacers and the mounting hardware for the front position.









