Overview
The ReadyLift 66-52200 is a 2-inch front leveling kit for the 2022 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR and SR5 trims. The strut spacers mount on top of the factory strut assembly, so the springs are not compressed during the installation.
It is designed for owners who want a level stance while running tires up to 34 inches. The no-trim maximum tire size is 295-60R20 on a 20×9 wheel with +18 offset. The kit keeps a smooth factory ride without adding stress to the stock suspension components. It is not for the Tundra iForce Max Hybrid or for trucks with factory rear air suspension. The spacers are steel with a black finish and mount on top of the front struts, so the springs are not compressed during installation.
Key features
- 2 inches of front lift
- Mounts on top of the factory strut
- No-trim maximum tire of 295-60R20 on a 20×9 wheel with +18 offset
- Steel strut spacers in a black finish
- Front lift only, with no bump stops
Before you buy
A front leveling kit changes only the front height, so the front and rear sit closer together. On a truck with a factory rake, that can improve the stance and give the front tires more room. The rear suspension stays at its factory height, so rear ride feel does not change.
Think about the tires and wheels you plan to run and how the truck is driven. Larger tires add weight and change steering feel, and the brake lines, sensors and steering components should be checked for clearance once the new height is set. Plan on an alignment after the install.
After the first few drives, check the spacer hardware and the upper strut mounts for tightness. Uneven tire wear or a bottoming noise over bumps are signs the setup needs a look.
- Confirm the tire size against your wheel offset
- Recheck hardware after the first drives
- Watch for uneven front tire wear
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-52200 |
| Type | Front leveling kit with strut spacers |
| Front lift | 2 inches |
| Rear lift | Front lift only |
| Spacer material | Steel |
| Finish | Black |
| Maximum tire without trimming | 295-60R20 on 20×9 wheels, +18 offset |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2022 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR and SR5 trims.
The kit is not for the Tundra iForce Max Hybrid or trucks with factory rear air suspension. The list does not cover the 2021 or 2023 Tundra. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacers change the front height, so have the alignment checked after installation.
What’s included
Steel strut spacers and the mounting hardware for the front position.













