Overview
The Rancho RS55054 is a rear RS5000X twin tube shock for the 2017 through 2019 Nissan Titan. It fits models without the Off-Road package, in 2WD or 4WD, at stock height with no lift.
The shock measures 15.04 inches compressed and 23.45 inches extended, with 8.41 inches of travel. Its top and bottom mounts are both eyelets, and it has an enlarged 2-1/4-inch twin tube body with a 16 mm nitro-carburized rod and a 1-3/8-inch sintered iron piston.
It uses progressive engagement valving and a tuned compression control valve. The shock is gas pressurized, and a protective boot covers the rod.
It fits 2WD and 4WD models without the Off-Road package. The protective boot and double-welded loops add strength, and the eyelet mounts at both ends are the top and bottom connection points. Confirm stroke and mounting against your truck’s current shock before ordering.
Key features
- Rear twin tube shock for stock height
- Progressive engagement valving
- Tuned compression control valve
- Gas pressurized twin tube body
- Eyelet mounts at top and bottom
- Rebound bumper and black natural rubber bushings
- Low-friction, self-lubricating seal
Before you buy
Rear shocks on a half-ton pickup do more than cushion bumps. They control how the axle and springs move after a jump or a washboard stretch, and a worn unit lets the rear end bounce and wander. On a truck driven both on pavement and on dirt, the shock works on every trip, so its condition affects steering feel and braking stability as much as ride comfort.
When choosing a replacement, match the mounting style and the extended and compressed lengths of the old unit before anything else. Consider whether the truck carries heavy loads, tows, or runs larger tires, since those change how hard the shock works. A shock built for stock height suits a truck still at factory ride height; if the suspension has been altered, the right shock may differ.
Shocks are often replaced in pairs so both sides damp the same way. Look over the rubber boot and bushings at each oil change, and watch for oil on the body, a clunk over bumps, or uneven tire wear as signs of a tired unit. Recheck the mounting hardware after the first few drives.
- Compare old and new lengths before ordering
- Consider load and tow use when picking a unit
- Inspect boots and bushings at each service
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS55054 |
| Series | RS5000X |
| Position | Rear |
| Shock type | Twin tube |
| Compressed length | 15.04 inches |
| Extended length | 23.45 inches |
| Travel | 8.41 inches |
| Top and bottom mount | Eyelet |
| Body | 2-1/4-inch twin tube, gas pressurized |
| Lift | No lift |
Vehicle fitment
It is a direct fit for the 2017 through 2019 Nissan Titan in the PRO-4X, Platinum Reserve, S, SL and SV versions.
The list does not include Titan models with the Off-Road package, or model years outside 2017 through 2019. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is included with the shock.









