Overview
The Rancho 4-inch Lift Kit, part number RS6554B, is a torsion bar relocation suspension system for the Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. It lifts the front with torsion bar relocation brackets, extended length steering knuckles and a heavy duty one-piece subframe, and lifts the rear with lift blocks and U-bolts.
The kit keeps the factory rack and pinion location, so the steering and alignment geometry stay intact and no steering correction is needed. It is rated for tires up to 35 inches and works with the stock wheels and tires.
Key features
- Torsion bar relocation brackets for the front lift
- Extended length steering knuckles
- Heavy duty one-piece subframe
- Lift blocks and U-bolts for the rear
- Impact strut included
- No drivetrain or exhaust modifications required
Shock and brake planning
Longer shocks change damping and how far the suspension can travel, so the shock package should be chosen with the lift in mind. Look for shocks sized for the new ride height and check the mounting points before the install. Shocks that are too short can bind at full droop.
Torsion bar relocation changes the front geometry and the position of the brake lines and steering knuckle. Look over the brake hoses and ABS wiring after the lift, and check the sway bar links, since they are often reused. Plan a full front alignment and tire check when the install is complete.
- Measure the stock shock length before buying replacements
- Check the brake hoses for stretch at full droop
- Inspect the ABS wiring for slack
- Look for tire rubbing at full lock
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS6554B |
| UPC | 39703003292 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Rear lift method | Coil springs with lift blocks and U-bolts |
| Steering correction | None required |
| Maximum tire size | 35 inches |
| Shocks | Not included |
Vehicle fitment
The kit fits these trucks:
- 2011 to 2017 Chevrolet Silverado 2500 HD
- 2011 to 2013 Chevrolet Silverado 3500 HD
- 2011 to 2017 GMC Sierra 2500 HD
- 2011 to 2013 GMC Sierra 3500 HD
Trucks outside these model years and the 1500 series are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Longer shocks are required and are not included, so plan the shock package before the install. The front lift changes the suspension geometry, so have the front alignment checked afterward.
What’s included
Torsion bar relocation brackets, extended length steering knuckles, heavy duty one-piece subframe, lift blocks, U-bolts and an impact strut. Not included: shocks, which need to be longer than stock.














