Overview
The Fabtech FTS21129 is a 4-inch ultimate lift kit with lift blocks, U-bolts and a Uniball control arm. The lift height range is 3 to 4.99 inches, and it is a rear kit only. OEM tires and wheels cannot be used with this lift, so larger wheels and tires that fit the new height are needed.
Key features
- 4-inch lift
- Uniball control arm
- Lift blocks and U-bolts for the rear
- Hardware included with eight tall nylock nuts and eight thick flat washers
Tires, wheels and rear alignment
Wheel and tire choice matters more with a lift. Larger tires change the effective gearing, add rotating weight and can rub the fender or inner liner at full compression or steering lock. Choose wheels with an offset and backspacing that clear the brake components and the body, and confirm the tire load rating for the vehicle.
A rear-only lift changes the rear axle position and the pinion angle, which affects vibration and U-joint wear. Uniball control arms work at a different angle after installation, so their bushings and joints should be inspected during service. Lift blocks and U-bolts should be retightened after the first few drives, and the brake lines should be checked for stretch since the axle sits at a new height.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21129 |
| UPC | 674866037281 |
| Lift height | 4 inches |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Rear kit only |
| Rear lift method | Lift blocks and U-bolts |
| U-bolts | Four |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the listed platform. Verify the year, model and trim of your vehicle before purchase.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is rear only and includes a Uniball control arm, alignment and driveline angles should be checked once the lift is installed. Fabtech says OEM tires and wheels cannot be used.
What’s included
- Two lift blocks
- Four U-bolts
- Eight nylock tall nuts
- Eight thick flat washers
- Uniball control arm
Not included: shocks.









