Overview
The Bilstein B8 5100 Ride Height Adjustable shock absorber, part 24-263108, is a front coilover-style shock for the 2016–2018 Toyota Tacoma. Bilstein designed it for trucks and SUVs with a front OE coilover style suspension.
Multiple snap-ring grooves let the spring seat sit at different positions, and the grooves allow up to 2.75 inches of front lift depending on application. The rated lift range is 0 to 2 inches, so the exact result depends on your setup.
Key features
- Snap-ring grooved body with several spring seat positions
- 46mm digressive piston with self-adjusting deflective disc valve
- Monotube internal design
- Designed to increase wheel travel and improve handling.
- Boot included
- Zinc plated finish
Coilover shock setup basics
A coilover-style shock carries the spring on the damper body, so the spring seat position controls the front ride height. Moving the seat to a different snap-ring groove changes lift and spring preload, and it also changes how the suspension works over bumps. Make small changes and recheck alignment after any height adjustment.
Because spring work stores energy, use proper spring compressing tools and follow safe procedures. Boots protect the shaft from dirt and grit, so check them for tears during service. Zinc plated finishes resist corrosion in normal use, but inspect the body for chips and rust when the truck runs in wet or salted conditions.
- Use proper spring compressing tools
- Check the boot for tears and cracks
- Re-check alignment after lift changes
- Inspect the upper mount for wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-263108 |
| UPC | 651860783581 |
| Position | Front |
| Fitment type | Direct fit |
| Collapsed length | 17.58 in. |
| Extended length | 22.22 in. |
| Travel length | 4.64 in. |
| Lower mount | Eye |
| Upper mount | Stud |
| Body design | 46mm ID snap ring grooved body (coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot | Included |
| Lift height | 0 to 2 in. lift |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma in Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims. Verify the year, model and trim against your truck before buying.
Other Tacoma generations and other Toyota models are not on this list.
Installation notes
Ride height is set by moving the spring seat to a different snap-ring groove within the stated range. Because this is a coilover-style shock, spring work requires proper spring compressing tools and care.
What’s included
The boot is included.
Not included: Check springs and bolt-on hardware against your installation before starting.









