Overview
The Bilstein 5100 Series shock absorber, part number 24-185684, is a front shock for lifted trucks and Jeeps and is designed for a 6 in. lift. The 5100 Series is a traditional single-tube, high gas pressure design built for consistent damping and long service life on lifted applications and prerunners.
This is a gas-charged monotube shock with a 46mm smooth body, a 14mm shaft, an eye lower mount and a stem upper mount. It is made for lift kits that keep the stock O.E.M. mounting configuration.
Key features
- Monotube gas pressure construction, which Bilstein says delivers consistent, fade-free performance
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Designed for control with large diameter tires
- Designed for manufacturer lift kits that use stock O.E.M. mounting
Before you buy
Lift height changes how a shock sits and how far it has to travel, so the collapsed and extended lengths matter as much as damping. Measure the shock you are removing, compare its lengths with the new unit, and check how far the suspension moves in normal use. A shock that is too short can limit travel, and one that is too long can load the mounts at full extension.
Gas-charged monotube shocks are under pressure, so have the old unit handled by a qualified shop rather than opened at home. Replacing shocks in pairs on the same axle keeps damping even from side to side. Inspect bushings, brackets and bump stops while the suspension is apart, since worn parts can change how the new shock behaves.
- Measure shock length before ordering
- Inspect eye and stem bushings for wear
- Check bump stops for cracks
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185684 |
| UPC | 651860618975 |
| Shock series | 5100 Series |
| Position | Front |
| Collapsed length | 12.87 in. |
| Extended length | 20.49 in. |
| Travel length | 7.62 in. |
| Lower mount | Eye, 16mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Gas charge | Gas charged |
| Reservoir | No |
| Finish | Zinc plated |
| Boot | Included |
| Lift height | Designed for a 6 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
Vehicle fit depends on the lift kit and your vehicle’s year, model and trim. Confirm both before ordering, since this shock is designed for lift kits that keep the stock O.E.M. mounting configuration.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower mount is a 16mm eye and the upper is a stem, so confirm both match your existing brackets or lift kit before fitting. Compare the 12.87 in. collapsed and 20.49 in. extended lengths with your suspension measurements before ordering.
What’s included
Each package contains a single front shock and its boot.









