Select your vehicle

Bilstein 5100 Series Shock Absorber – 24-267021

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2002–2009 Chevrolet Trailblazer and GMC Envoy, the 2003–2008 Isuzu Ascender and the 2002–2004 Oldsmobile Bravada
  • Bilstein B8 5100 rear shock absorber, part number 24-267021
  • Monotube design, 0 to 1 in. lift range
  • Single rear shock per listing

Description

Overview

The Bilstein B8 5100 rear shock absorber, part number 24-267021, fits the 2002–2009 Chevrolet Trailblazer, the 2002–2009 GMC Envoy, the 2003–2008 Isuzu Ascender and the 2002–2004 Oldsmobile Bravada. It is a single rear shock with a monotube design.

The B8 5100 is a direct-fit shock for lifted trucks and SUVs. Each unit is tuned for its specific application, and a velocity-sensitive, digressive piston adjusts to changing road conditions. The design aims to improve ride quality, handling and comfort.

The lift range is 0 to 1 in. The Trailblazer EXT and Envoy XL are also named for 02-06, which goes beyond the manufacturer fitment list below.

Key features

  • Monotube design for consistent, fade-free performance
  • Velocity sensitive, digressive piston
  • Tuned for each specific application
  • Rear position, direct fit
  • Lift range of w/0 – 1 in.
  • Named for the Trailblazer EXT and Envoy XL, 02-06

Rear shock wear and replacement

A rear shock controls body motion and keeps the tires planted as the axle moves over bumps. On a lifted vehicle the rear suspension geometry changes, so a shock that matches the lift height helps keep the ride controlled and the tires in contact with the ground. Worn shocks often show oil on the shock body, a rear end that keeps bouncing after a dip, or cupped tire wear on the same side.

Replace rear shocks in pairs on the same axle so damping stays even from side to side. Before removing the old unit, check the upper and lower mounts and bushings, since a worn bushing changes how the new shock loads. Tighten fasteners to the factory service torque for your vehicle, then re-check them after the first few drives.

  • Check the upper and lower mounts for cracks or wear
  • Look for oil seepage on the shock body
  • Note any leaning or sagging at the rear corners

Specifications

Brand Bilstein
Part number 24-267021
UPC 651860804347
Product line B8 5100
Position Rear
Fitment type Direct Fit
Lift height w/0 – 1 in. lift
Construction Monotube
Quantity Single rear shock

Vehicle fitment

It fits the 2002–2009 Chevrolet Trailblazer in Base, LS, LT, LTZ and North Face trims, the 2002–2009 GMC Envoy in SLE and SLT trims, the 2003–2008 Isuzu Ascender in Base, LS, Limited and S trims, and the 2002–2004 Oldsmobile Bravada in Base trim.

Other model years and trims not named are not covered. The Trailblazer EXT and Envoy XL are named for 02-06 but are not in the manufacturer list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber. Confirm mounting hardware against your installation before starting.

SKU: BIL24-267021 Category:

Specification

Shipping weight 5.50 lbs
Package dimensions 26.80 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Trailblazer2002–2009Base, LS, LT, LTZ, North Face
GMC Envoy2002–2009SLE, SLT
Isuzu Ascender2003–2008Base, LS, Limited, S
Oldsmobile Bravada2002–2004Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the Bilstein 24-267021 fit?

It fits the 2002–2009 Chevrolet Trailblazer and GMC Envoy, the 2003–2008 Isuzu Ascender and the 2002–2004 Oldsmobile Bravada. Trailblazer EXT and Envoy XL models from 02-06 also apply, so check your exact model and trim before ordering.

Is this a front or rear shock?

It is a rear shock with a monotube design, and its position is Rear. The lift range is 0 to 1 in., so match the shock to a vehicle within that range. Confirm fit for your vehicle's year, model and trim before ordering.

What does the B8 5100 name mean?

The part is from Bilstein's 5100 series, which is built as a direct-fit option for lifted trucks and SUVs. Match the part number 24-267021 to your application rather than the series name alone.

Does the package include mounting hardware?

The package is one rear shock absorber. Review the included parts against your installation, and gather any mounting hardware your vehicle needs before starting.

How can you tell a rear shock is worn out?

Common signs include oil on the shock body, a rear end that keeps bouncing after bumps, uneven tire wear, and a loose feel on rough roads. Inspect the mounts and bushings as well before deciding whether the shock needs replacing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon